Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Seeking best ideas for clamp storage...

Posts

Re: Seeking best ideas for clamp storage...

#26

Older quick clamps?

wilbur

>I'm probably -- no, most likely wrong on this, but are there "older" one-handed quick clamps? Who made them back in the day? I always thought that the one handed quick clamps were a relatively recent invention, and all the ones I've seen were made of plastic.

Re: Seeking best ideas for clamp storage...

#27

Re: Older is relative

Wiley Horne--So. Calif.

>You're right. These aren't the fabled 18th century ones, that almost made it to Moxon's Plate 4...... No, the ones I have turn out to be first generation Irwins, or more likely the inventor company that Irwin bought out.

I just did a little looking around, and found the Irwin ones that Bob has. Also found out that Bessey is, as we speak, coming out with a new model. They're red and black, and look a bit like those Craftsman ones that Bob has.

I shudder to think of the cost of the Bessey's, specially since I'll probably go for 'em. The Irwin's are reasonable, but maybe for a reason.

Wiley

Re: Seeking best ideas for clamp storage...

#28

Re: Older quick clamps?

amelon

>Hi Wilbur,

I have 3 generations of the Quick-Grip clamps. I bought a few in the late 90's and they were made in US by American Tools Companies, Inc. These have 1991 stamped on them. The next generation was from Newell Rubbermaid and stamped 2003. I don't know where they were made. Lastly, I have the ones from Irwin with no year stamp. I don't know where they were made. Possibly some of these are still made in the US, as my web search seems to indicate.

- Bob

Re: Seeking best ideas for clamp storage...

#29

I happened to be reading a 2002 "Wood" magazine

Bill Houghton, Sebastopol, CA

>with an article on the one-handed clamps, and they recommended the Bessey "PowerGrip" clamps that have a trigger for quick action AND a screw, like an F clamp, for pressure. American Tool Company, the originator (as far as I know) of the trigger-type one-hand clamp, later bought by Irwin, offered a similar clamp, but Irwin has dropped it from their line.

Of the pure trigger-type clamps, Wood magazine recommended the Wolfcraft "Quick-Jaw" clamps, which generated higher pressure than others and allowed you to step the clamp open one handed as well as close it. I also like the jaws, which run all the way to the bar instead of being up in the air, as the American Tool/Irwin clamps are (I note that Irwin is now offering a premium line of these clamps that look remarkably like the Wolfcraft clamps). I'm not sure who sells Wolfcraft - it's a German company that doesn't seem to have good market presence in the U.S.

I have no direct knowledge of these clamps, just the article; and I haven't always been impressed by the acumen of the "Wood" editors.

I own just a couple of the original American Tool Co. clamps, a Christmas gift from my father, mainly used for holding stuff still while cutting it, although the flex in the plastic jaws also makes them useful for clamping oddly shaped things like plane totes being repaired.

Re: Seeking best ideas for clamp storage...

#30

Great post, Bill! *LINK*

Wiley Horne--So. Calif.

>The ones I have are the original American Tool ones. They're still good.

I took another look at those trigger + screw Bessey's and they have a lot going for them. But then they cost $45 a piece for 12". Plus they'll be heavy, which is kinda fighting with the idea of a fast manueverable clamp that you can get on the work right now, and won't be too big of a counterweight.

I bought some Wolfcraft tooling some years ago, from one of the now-defunct big box stores, and it was good quality. They're still around if you Google.

I went back and checked Lee Valley's clamps. First time around I couldn't find the trigger-pull ones, because LV has them listed under the 'Bar/Spreader' category, whereas I was looking in 'Fast Acting' which is more intuitive (to me). A more careful search under Bar/Spreader did come up with a good candidate, which are aluminum and deliver a lot of pressure, but will also be lightweight and handy. See link. They're my first choice right now.

Wiley


Lee Valley--aluminum trigger pull clamps 700 psi

Re: Seeking best ideas for clamp storage...

#31

Re: Seeking best ideas for clamp storage...

Victor Parisian

>So tell us Bob; Where do you keep the rest of your clamps?

Victor

Re: Seeking best ideas for clamp storage...

#32

In Canada

Frank D. in Montreal

>THey are sold at CAnadian Tire under the Mastercraft brand name. I love those clamps.