Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Seeking best ideas for clamp storage...

Posts

Seeking best ideas for clamp storage...

#1

Seeking best ideas for clamp storage...

John Aniano in NJ...

>A question for the "storagely inclined" out there:

I'm being overrun with wooden clamps as you can see here. This is just one of the piles of clamps in my shop. Many are simply stacked on the floor, against walls, etc.

My new shop is finally taking shape and I'd like to get these clamps moved to the new space, but NOT on the floor! I'd rather aim for wall storage and I don't want to use pegboard. Any ideas out there for creative methods for storing these gems? I have a number of Jorgensen-type clamps as well, so I'd want to be able to store the older all wood clamps as well as the Jorgensens.

Thanks,

John


img

Re: Seeking best ideas for clamp storage...

#2

Impressive driveby, John

Bill Houghton, Sebastopol, CA

>I'll be interested in watching this thread. My clamp inventory is way smaller, but my shop is small, too - I keep thinking clever storage will somehow expand its size (I've been in denial about the limits of space since I was a kid, and wanted to build my own Disneyland in the backyard).

The best thought I've come up with so far involves 2x6s shelfwise on the wall, but slanted up (higher edge away from the wall), and the jaws of the clamps resting on them. I suspect this will require lightly closing the jaws, though, to keep them from falling off; so more time-consuming to put them away.

Re: Seeking best ideas for clamp storage...

#3

Re: Impressive driveby, John

John Aniano - collecting clamps in NJ...

>Bill,

I was not aiming for a true "Drive By" - I assume everyone has piles of stuff like this. Here is another of the piles of clamps that need a storage solution. Notice the pipe clamps piled under the bench (adding stability) - I need to find a better place for these as well.

The large bench screws are slated for a pair of leg vises (left and right) for a 10-foot Roubo-style bench now in the rough wood cutting stage. The chain saw has been very helpful cutting the large timbers (you can see the chain saw bar behind the clamp pile) but that is a story for another thread...

John

John


img

Re: Seeking best ideas for clamp storage...

#4

Multiclamps portable storage

Bob Demers

>A long while ago, I build this clamp tree on wheel. It hold a multitude and variety of clamps, which (in theory) you simply wheeled to your project as needed. I say in theory, because in practice, one need a clear path on the floor to move from A to B :-)

I think I originally got the idea from Wood magazine?

It works good, it can hold anykind of clamps securely for moving, except of course the long ones (K Body, bar clamps etc)

For pipe clamps storage, my favorite, inexpensive solution is to use a row of cheap broom holders (the spring type with plastic rollers at the mouth). I simply mount them on a board in a row and move the board with me when I move locations (often, im military)

You can see the pipe clamps standing in thses holders in the background. Yes 3/4 pipes are a bit thight in these holders but it work fine, and whenever they get too loose, I simpply replace that holder. Im using real cheap dollar store type broom clips, you get what you pay for.

That is an old picture, taken in my former cramped shop while I was in Ottawa, ON

Bob


img

Re: Seeking best ideas for clamp storage...

#5

Spring clamps storage

Bob Demers

>Again, another 'portable' solution.

I made this two rows, wooden box to hold what I had on hand (since outgrew, oh well)

Note there is no bottom to it, its a U shape

Im happy with this design and would not change much if anything

I of course have many more clamps, but im affraid they are currently 'stored' like yours John :-)

Bob, who one day dream of getting organized


img

Re: Seeking best ideas for clamp storage...

#6

Correction, there are 3 rows

Bob Demers

>

Re: Seeking best ideas for clamp storage...

#7

Another view

Bob Demers

>Made entirely with left over scraps, and surplus furniture rollers


img

Re: Seeking best ideas for clamp storage...

#8

Re: clamp portable storage - Lee Valley Gripits *LINK*

John Aniano in NJ...

>Bob,

Seeing your pipe clamp wall storage solution gave me an idea - instead of using the "real cheap dollar store type broom clips" as you described them I'll get the Lee Valley "Gripit" garden tool holders. If you have never seen them I've included the link below. They are great tool holders and are very strong. They will work perfectly for pipe clamp storage.

Also, thanks for the idea of the mobile clamp cart. I'd prefer a wall mount, but I can use concepts from your cart and implement them into a wall unit.

John


Gripit Tool Holders from Lee Valley

Re: Seeking best ideas for clamp storage...

#9

Jack Guzman from Maine

My solution

Jack Guzman from Maine

>John,

I found that the easiest way to store my wooden clamps is by clamping them into a protruding board edge.I have a couple small open shelves with sides that hang a couple inches below the bottom shelf.These are on the wall above a bench. I just tighten the clamps to the bottom edge.I can get 4 clamps on each side.I've seen them attached to ceiling joists and exposed wall studs also.---Jack

Re: Seeking best ideas for clamp storage...

#10

Re: clamp portable storage - Lee Valley Gripits

Bill Houghton, Sebastopol, CA

>My dad gave me some similar storage devices years ago. I found them a little frustrating - maybe I just didn't get the technique down, but they seemed to need a little more attention when putting things in them than the traditional broom clip, and often both hands, requiring that I put down whatever else I was holding. Maybe Lee Valley's are better than the ones I had.

Re: Seeking best ideas for clamp storage...

#11

Me Too

R.J.Whelan - Sierras, California

>I don't have anywhere close to the number of hand screw clamps as you, but I just screwed a 2 x 4 to the wall (on edge) and tighten the clamp to it.

Re: Seeking best ideas for clamp storage...

#12

Re: Spring clamps storage

Pam Niedermayer, Austin, TX

>I am so cheap. I ran a heavy string between vertical 2X's in my shop, clamp the spring clamps handle down. I thought I'd replace the string with wire of some sort when the string broke, but it hasn't in 8 years.

Pam

Re: Seeking best ideas for clamp storage...

#13

Depending on your shop set-up...

Scott Burr in Ben Lomond CA

>My shop is under the house. I simply attach the hand screws to a floor joist above my head, this would work on a sealing joist as well. Bar clamps are placed in a 2X spanning a few studs.

Re: Seeking best ideas for clamp storage...

#14

Re: Seeking best ideas for clamp storage... *LINK*

stewart spiers

>Bob Smalser's Wooden handscrew clamp tree.


img

smc thread w Smalser clamp storage

Re: Seeking best ideas for clamp storage...

#15

Re: Seeking best ideas for clamp storage... *LINK*

amelon

>My workshop occupies a 1-car space in the garage so space is a premium. I made a clamp rack that is 3' long x 16" wide x 5' high out of 2x4's and plywood. There are multiple levels (and layers) of horizontal 2x4's used to rest the clamps on. All in all, there are about 160 clamps of different varieties.


img

Clamp rack - 3' L x 16" W x 5' H

Re: Seeking best ideas for clamp storage...

#16

Photo fixed

amelon

>Fixed link to photo.


img

Re: Seeking best ideas for clamp storage...

#17

Re: Photo fixed (try again)  *LINK*

amelon

>


img

Link to clamp rack

Re: Seeking best ideas for clamp storage...

#18

Re: Photo fixed (try again)

Wiley Horne--So. Calif.

>Bob,

That is extremely neat and efficient. Fair amount of room still left on it also!!

Wiley

Re: Seeking best ideas for clamp storage...

#19

Fair amount of room still left on it

wilbur

>That just means that Bob doesn't have enough clamps. :@)

Re: Seeking best ideas for clamp storage...

#20

I'm always impressed when

Wiley Horne--So. Calif.

>someone makes a tool cabinet that still has some room left the day it is commissioned. Saws multiply like rabbits, for example.

Confession: I have a secret brace jumble. Braces are about impossible to hang efficiently. Who was it that had them all over his ceiling? Todd Hughes?

Wiley

Re: Seeking best ideas for clamp storage...

#21

Re: I'm always impressed when

amelon

>Thanks, Wiley.

Wilbur is right! I've heard all the raves about these Wetzler quick clamps (read some of Wilbur's posts) and I made sure I left some room for 'em. B-)

- Bob

Re: Seeking best ideas for clamp storage...

#22

Re: Photo fixed (try again)

Bob Demers

>Indeed, I like it better than my present clamp tree on wheel, at times I find it a tad cramped to tighten the close proximity clamp's handles.

I must say, thought, the first reaction I had when viewing the pictures on Picassa was: What, no dust? These clamps look very new and shiny to me :-)

Bob, whose clamp collections would require more than a dusting to look half as good im affraid :-)

Re: Seeking best ideas for clamp storage...

#23

What I really want to know about clamps

Wiley Horne--So. Calif.

>Hi Bob and everyone else too,

Any opinion on which are the best quick-acting clamps? I don't mean the Wetzlers, although I'm sure they're great. When I think quick-acting, I am thinking "one hand" clamps where you can hold something where you want it with one hand, and clamp it in place with the other.

I have some of the older quick clamps which do this, and they're good. They're fast, and they've held up well (cept for a couple of pads that are lost somewhere in the sawdust). But they don't have much muscle. All opinions welcome.

Wiley

Re: Seeking best ideas for clamp storage...

#24

Re: Photo fixed (try again)

amelon

>Hi Bob,

I spent several hours polishing those clamps for the photo shoot. ;-)

Honestly, space is rather tight that I confine myself to small projects. So for most projects, the quick-clamps and F-clamps are sufficient. The longer clamps haven't seen much use.

- Bob

Re: Seeking best ideas for clamp storage...

#25

Re: What I really want to know about clamps

amelon

>Hi Wiley,

I am also interested to hear about the different products out there. Quick-grip-like clamps are the ones I use most in my shop.

I have a few "quick-grip" clamps by Craftsman which I purchased a few years back at OSH. I don't know if they are still made. Very sturdy and rather strong grip, for quick-grip. Below is a photo comparing the Craftsman against the bigger Irwin Quick-Grip. The big Irwin is also good although a bit clunky compared to the Craftsman. Both are about 20". The jaws on the Craftsman are more parallel and they

grip a bit better. I like the Craftsman.

- Bob


img