Re: How did you attach the bottom?
Pam Niedermayer, Austin, TX
>I suppose you could dovetail the bottom on the ends, but not in the long grain.
Pam
Knowledge You Can Build On — Est. 1998
Re: How did you attach the bottom?
Pam Niedermayer, Austin, TX
>I suppose you could dovetail the bottom on the ends, but not in the long grain.
Pam
Re: Those are nice boxes!
amelon
>Alan,
I have not been to the Bay Area Galoots nor the BAG-A-THON. I'll try to tag along with Manny next time. The Kelseyville area for your home looks very nice.
- Bob
You would get along just fine with the BAG people
Alan DuBoff
>Bob,
You would get along well with the BAG people (as I call them;-).
The BAG-A-THON happens once a year and is typically the weekend after labor day...but it can vary depending on who hosts it. It moves around the bay area.
Not sure where it will be this year.
Sometimes there will be a project, and typically some blacksmithing.
BTW, that reminds me, did you forge those nails? I have forged some in the past...
Cheers,
Alan
The Bottom
Mike Fitterling
>The bottom sits in a groove.
If you dovetailed the sides to join the bottom the tails would be very weak because the grain would be running acoss the tails on the long sides, and the movement would cause problems on the ends with the side grain oriented 90 degrees to the bottom. You could turn the grain of the sides 90 degrees (so the grain is running vertically) but then the weakness issue would now move to the corners if you dovetailed them, too. The groove is a time honored technique for this kind of construction and for a good reason.
Cheers,
Mike
Re: The Bottom
Alan DuBoff
>Mike,
I started to dovetail the bottom, and think it will be strong enough. The sides do have the grain running vertical, we'll see how strong it is.
The shelf is going to be grooved. The bottom section will hold the drawer, though. Hopefully it won't be too much for it. Time will tell...
I'll post pics after I get it together, or after I redo it if it fails.:-)
Cheers,
Alan
Re: You would get along just fine with the BAG peo
amelon
>Sounds good, Alan. I'll check out the "BAG".
The nails I got from Orchard Supply Hardware. They sell them in a small box labeled as Decorative Nails. They're shaped like cut nails and have rather random looking faces to give them a handmade appearance. I also found similar nails at Lowes in brass as well.
- Bob
Who would have figured...
Alan DuBoff
>Bob,
I'll have to look at OSH the next time I'm there, I've never seen/looked for them. I've seen a couple places online that have them. I will often avoid nails though...:-/
Funny, there's a hardware store over by you that I often go to, Dale Hardware, not sure if you go there or not...it's one the best hardware store in the area, IMO. If I'm over on your side of the bay I go there.
Cheers,
Alan
Re: Show me your Toolboxes and/or Totes
wilbur
>I don't have much to add on the toolbox issue, but I had a chance last year to look at Bob's toolboxes up close and personal, and they are really very nice, and very well thought out.
Re: Show me your Toolboxes and/or Totes
Bruce
>Here's one I built in a class at Homestead Heritage.
31" wide x 19.5" tall x 11" deep, made from pine.
A Clark & Williams panel raiser was used to raise the panels.
Used a Wenzloff & Sons dovetail saw for the dovetails.
Re: Show me your Toolboxes and/or Totes
Wiley Horne--So. Calif.
>Bruce,
Very handsome! Do you have any photos of the inside partitioning?
Wiley
Please!!!!!! I'd love a peek inside it.
Scott Burr in Ben Lomond CA
>
Would like to see the inside also!
Alan DuBoff
>Bruce,
Would love to see the inside, like others. Beautiful looking box!
Cheers,
Alan