Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Nude woodworking- a closer look

Posts

Nude woodworking- a closer look

#1

redcoat

Nude woodworking- a closer look

redcoat

>I also have an interest in photography and belong to a gallery. There is an upcoming show and the theme is "The Nude". I have come across a way to combine woodworking, photography and fit the show criteria.

I plan to make a tri-fold screen from some of my salvaged knot free pine, and use some huge heavy sheets of tissue paper I found at a demo site as the panel fillers, then hopefully get one of the women I know to play along undressing behind it. Back lit, it should throw a nice silouette on the paper.

Questions:

What is that stuff you paint the tissue paper on model airplanes with? I aint gonna pay $6/oz when I need a quart. Can you suggest something else that will tighten the paper as it dries?

Holding the paper: I thought of some commercially available beading, like round a window that holds the glass in. Other ideas?

Part two- I am thinking of using red oak beading to create contrast with the white/yellow pine. And nail it in with cigar box nails in case a screen needs replacing.

Post photoshoot I am thinking of sketching in the silouette and having an artist fill it in.

Throw your ideas in please...I have 2 weeks to do it all in.

Re: Nude woodworking- a closer look

#2

Re: Nude woodworking- a closer look

Bill Houghton, Sebastopol, CA

>THAT was a teaser of a subject line!

"What is that stuff you paint the tissue paper on model airplanes with? I aint gonna pay $6/oz when I need a quart."

We used to call it airplane dope, but I have no idea what it's made of, although it was a pretty potent way for pre-teens to get slightly stoked... I'd troll through model airplane sites.

"Can you suggest something else that will tighten the paper as it dries?"

You might consider rice paper, which (I understand) can be glued on, then wet, and which will then shrink. Used in Japanese sliding panels, the name of which I forget (maybe Pam or Wiley or Wilbur can jump in here).

"Holding the paper: I thought of some commercially available beading, like round a window that holds the glass in. Other ideas?"

See reply #2.

Re: Nude woodworking- a closer look

#3

Re: Nude woodworking- a closer look

dave Jeske

>When I built model airplanes with tissue I would attach the tissue with glue or dope and then shrink it with a fine mist of water from a spray bottle. When it dried, the tissue was tight. Then I applied the clear dope to strengthen and stiffen it. I believe the dope is a type of lacquer. I would do a small test section.

Dave

Re: Nude woodworking- a closer look

#4

OK ... Ya dopes...

Scott Burr in Ben Lomond CA

>I was ready to bust a nut on this one. I built a plane out of all mentioned. Between Bill and Ted...wait a minute...

Opps! I mean Dave. The paper was like rice paper. Dope was applied to attach the paper to the wings. Then clear lacquer. Half the fun was the high you got making the plane. Now I know why you need to have an adult's supervision/permission to buy model glue today or in my prime.

Re: Nude woodworking- a closer look

#5

Re: Nude woodworking- a closer look *LINK*

Tom MacGregor

>Nitrate dope $17/quart + S&H. I am not familiar with the product or company but they look like established suppliers to model hobbyists.


http://www.sigmfg.com/cgi-bin/dpsmart.exe/MainMenuFV4.html?E+Sig

Re: Nude woodworking- a closer look

#6

Re: Nude woodworking- a closer look

Chris Friesen

>Plain water will work just fine to tighten up paper. The only reason it's not used for airplanes is that any future exposure to water will cause it to loosen up again until it dries out.

Re: Nude woodworking- a closer look

#7

Summing up these posts...

Paul M.

>I guess the moral to this story is:

If you don't get high on plane dope, you need to keep your nudes dry.

Re: Nude woodworking- a closer look

#8

Re: Nude woodworking- a closer look

Marv

>My first thought is to use Clear Krylon that you can buy at Wal*Mart for a few bucks a can. Spray both sides.

Marv

Re: Nude woodworking- a closer look

#9

redcoat

Re: Nude woodworking- a closer look

redcoat

>What is Krylon and which section do I find it in? Home decor?

Re: Nude woodworking- a closer look

#10

Krylon

Bill Houghton, Sebastopol, CA

>this may, of course, be an American brand name, but it seems most such make it over the Canadian border.

Krylon is one name for a spray "enamel," although I dries so fast I suspect it's a lacquer. In American hardware stores, it's usually in the paint department; don't know Canadian practice.

I doubt it would tighten up your covering.

Re: Nude woodworking- a closer look

#11

Re: Nude woodworking- a closer look

Marv

>Sorry, forgot you are in Canada......Wal*Mart paint department. Clear lacquer would do the same thing...dries fast too, just like Krylon.

Re: Nude woodworking- a closer look

#12

Re: Nude woodworking- a closer look

Neal in San Jose

>Back in my wayward youth, I built many model airplanes. I used to cover them with pure silk which was much stronger and more colorful than the paper sold for that purpose. You could add some visual interest beyond the figure on the other side with patterned silk or solid color. I've gotten really great deals on pure silk scarves on the discount rack.

Silk goes on and handles similarly to the paper. Glue down the edges with dope or whatever and spray with water to shrink it. DO NOT USE any fabric blends, like silk+rayon. It will not shrink. Silk for covering model airplanes is available from hobby shops and on-line. I Googled "model airplane silk" and got almost a million hits, including some very complete instruction.

Re: Nude woodworking- a closer look

#13

Re: Nude woodworking- a closer look

Todd Stock

>Butyrate lacquer (as in Cellulose Acetate Butyrate aka CAB), but nitrocellulose lacquer will also shrink enough to get the same effect.