Re: Sharpening the elusive $5.00 card scraper
Charles
>Understanding what you're trying to achieve is the first step. Each burr should look just like the crest of a wave as it barely begins to break.
The vast majority of people turn the burr too far over as evidenced by them having the lay the scraper way over to a ridiculously obtuse angle before it starts to cut.
You ought to be able to file the edge effectively with the jig you already have. If not, you are simply overthinking it and making something hard out of something easy. Just relax and let the jig register the file. After that, you can stone the edge if you want to but it is not an absolute requirement. I don't always and my scrapers cut fine.
Get a round burnisher. Screw the teardrop thingy. Then burnish at a slight angle, judge it by eye, with no more pressure than you would use buttering bread - as it has been put by a woodworking writer lost to my memory. He or she was right, however, and I am just passing this tidbit along for it's a good one.
Most of all, quit worrying about prepping some incredibly sharp edge before you turn the burr. Mostly filing is about removing the old burr and freshening up the edge a bit before turning a fresh burr.