Re: Name dropping and plane thinking------WebKitFo
David Brown------WebKitFormBoundaryq5YIuve+a7ohKJL
>Adam,
I think you're right that one can get a bit over interested in theory. I was highly intimidated by the thought of building a plane for years. So much so that even though I bought the blade for it, I didn't do it until recently. Now, I'm planning on making a bunch because they're not that hard to make well and they work so well. But at the same time, I don't want to make a critical mistake. It doesn't sound like this is very critical.
On a different note, do you know what the historical practice regarding blade cambering was? DC and Schwarz have both indicated they sometimes camber the blades of even block planes. DC also suggests (I seem to remember) in one of his videos that he likes the camber in his #5 to help in squaring edges to faces because you can put the right part of the curve to get either a thicker or thinner shaving where you need a thicker or thinner shaving. I hope I'm not mis-representing him in this. But Finck shows planning technique in his book that is entirely based on straight plane blades and involves multiple passes, starting with say, the high part of the edge, then moving the plane over and cutting what was just cut and the part that wasn't, so you get it down to square because you took two (or more if needed) passes on the high spot, but only one on the low spot. I am curious what the historical practice is regarding cambered blades.
Thanks. I feel like I'm having a virtual beer with you. Have one on me.
--Dave
------WebKitFormBoundaryq5YIuve+a7ohKJL3



