Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Choosing a Pull Saw?

Posts

Re: Choosing a Pull Saw?

#26

Re: Hmmmm, In my neck of the woods...

Warren in Lancaster, PA

>I think you are talking about dimensional lumber, Scott, stuff for carpenters. If I buy a rough piece of 4/4 white pine, six inches wide and 8 feet long, the actual thickness is about 1 1/8, the width is between 5 1/2 and 6 1/2 and the length is usually around 98 inches. If the length is only 95 inches it goes for a six footer, kind of a bargain. There is also 5/4 ,6/4, 8/4, 12/4.

Re: Choosing a Pull Saw?

#27

Hi Warren. Dimensional lumber is a...

Scott Burr in Ben Lomond, CA

>Strange beast here at home centers and lumberyards. The redwood and pine is all 1X etc. The home centers sell no hardwoods for the most part. They sell shelving in walnut and oak, etc. all is classified as 1X stock.

Only at a "hardwood" supplier here we have like Aura and Jackel is it measured in 1/4s.

Go figure...

Re: Choosing a Pull Saw?

#28

That's exactly how it is here

VT_Andy

>... but I guess some people are buying softwood dimensional lumber for building furniture.