Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

OT - reinforcing concrete

Posts

OT - reinforcing concrete

#1

OT - reinforcing concrete

Bill Houghton, Sebastopol, CA

>I'm hoping, tomorrow (thursday), to pour a long, narrow foundation for brick edging a walk out front - 4x4 inches, about 40 feet long, one each side.

I'm thinking I'd like to put some steel in to kind of tie it together, but rebar is a bit much. I've thought of trying to find something like tie (baling) wire, but in a larger gauge; or 3/16-1/4" steel cable, which might be kinda pricey.

Any ideas?

Re: OT - reinforcing concrete

#2

Re: OT - reinforcing concrete

Michael Stadulis in Southern NJ

>use a reinforcing product called WWM which is an acronym for Welded Wire Mesh. Its the industry standard for concrete slab wok. Goes in the bottom 1/3 of the slab.

Mike

Re: OT - reinforcing concrete

#3

Jesper, Denmark

Re: OT - reinforcing concrete

Jesper, Denmark

>You don't really need any rebar in this. Curbstones are regularly set in just a dry cement base with no reinforcement. 4 x4 base is probably not enough, though. You should have some 4-6-inches below the bricks and a slope of 45� away from the bottom of the brick.

Dry cement is not really dry, but mixed so that it is just damp and still behaves like wet snd and does not flow when worked.

You probably cannot read the text, but the pics here will give you the idea: http://www.sagranit.dk/PDF/vejledning-kantsten.pdf

Re: OT - reinforcing concrete

#4

1/4" rebar

Bill Tindall, E.TN

>Or alternatively, if you live in farm country, 8 ga. fencing bracing wire available at any farm store.

Re: OT - reinforcing concrete

#5

Re: OT - reinforcing concrete

Marv....... Northern California Lake Co.

>Bill,

I'd use 3/8" diameter rebar. However, I'd make it 4" by 6" deep.

If I understand you correctly, it will be edging for the brick and you will see the top surface?

Marv

Re: OT - reinforcing concrete

#6

Bill, you don't need concrete for that.

Joe Shelton

>A brick paving strip adjacent to an existing concrete walk will do just fine if laid on a generous bed of Type M masonry mortar.

Your weather and climate just doesn't need any more than that, and metal ties (or other reinforcement) would be superfluous.

But, if you want to do it, a good way to do so would be simply to use corrugated wall ties at 12" intervals.

The single biggest determinant of longevity in work like this is getting fully filled joints all around the paver.

Joe

Re: OT - reinforcing concrete

#7

Thanks, all

Bill Houghton, Sebastopol, CA

>What I wanted to step away from was the bricks laid on the ground side by side, with space for weeds between - we've spent so much time on maintenance, and the goal now is reduced watering and reduced maintenance time.

Re: OT - reinforcing concrete

#8

Re: There are a couple of options...

Glenn Madsen near San Francisco

>One of which is a sand mix that has a sealing mixture in it, used for filling in stone paver patios. I didn't use it, but the neighbor did, and while the commercial application wasn't cheap, his driveway/patio/walkway looks nice. Mine gets the plant matter scraped out when I get to it, and looks 'a bit rustic'.

In the back, I used a fabric underneath all of it, and the plants pull out pretty easily when they are so encouraged...

Re: OT - reinforcing concrete

#9

What I'm using

Bill Houghton, Sebastopol, CA

>My hardware store sells something they call "merchant wire*," similar to fence bracing wire, I imagine, but galvanized, in ten-pound rolls (the larger the wire, the fewer feet, and vice versa). I wound up buying about twice the length I need, maybe more, but the larger gauge wire was too stiff to work easily.

The staffer at the hardware store to whom I talked didn't know where the term comes from, although he liked my two-part line about how merchant wire must be what you use to bundle merchants for shipping, and investment banker wire is similar, but with long barbs.

*I did a little googling, and it is a standard wire description; fairly low strength steel wire, sold in black and galvanized.