Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

OT - lost skills

Posts

OT - lost skills

#1

OT - lost skills

Bill Houghton, Sebastopol, CA

>I had to buy a new ignition module for the rototiller today. I was shocked to realize that it's a 20-year-old tiller, with an electronic ignition - it didn't seem like it's been that long that reliable electronic ignition systems have been on the market.

Which then led* to meditating on how long it's been since I changed a set of points...quite a while. I was a master at point adjustments, sensing when that feeler gauge was sliding just right.

When then led....back in the typewriter days, I was the acknowledged office master at whiting out small typographical errors and retyping. I could hide one- and two-letter errors so you couldn't see them unless you held the paper up to the light.

All these fine motor skills, completely useless now; but then, I spend SO little time maintaining our cars in comparison to back then (it helps that we got enough money that we're no longer buying clapped-out beaters), and I can reprint a page faster than I could have corrected the error.

*Our tractor place has moved, and is now half a mile away - so I walked down and back. Lots of meditating time there.

Re: OT - lost skills

#2

Re: OT - lost skills

Dan Donaldson

>Remember when "cut" and "paste" meant literally cut and paste? I put together many presentations by doing that and then making copied. You had to paint the edges with whiteout so there would not be shadows outlining the pasted areas. My how times have changed. ;-)

Re: OT - lost skills

#3

Re: OT - lost skills

Bruce, a MN Galoot

>I once had an IBM selectric, not the full 12" carriage, but the 8.5" carriage, and I thought that was the cat's meow! I think things have changed, not so much me, though, as the time's they are-changing.

I have this sense of being left behind...

Maybe that's why I like my type 2 #7 so much.

bruce, not the only MN galoot

Re: OT - lost skills

#4

Re: OT - lost skills

Bill Houghton, Sebastopol, CA

>We used to type up the job announcements, from drafts submitted by the hiring department, and route them back for review. Frequently, when the department manager saw it in the flesh, s/he would want some revision. Our rule was, "Yes, you can change it, if the change will take up no more lines than the draft." We would then retype those lines and paste that over the original.

I used to tape the announcement up on the window and use the backlighting to align the paste-up. We were so excited the year that the end-of-year budget was enough to spring for a light box.

Re: OT - lost skills

#5

Re: OT - lost skills

Tony - Memphis

>Well, I just got rid of the points in my '54 Chevy. And I was glad to see them go! What a difference the new module makes. I can tell a huge difference in how the old gal runs. This module fits inside the old distributor and required no major alterations. Now, what to do with a tach/dwell meter? Hopefully, this will keep the plugs from fouling as often too. This is an orignal motor - never been rebuilt -so its a little tired.

Tony

Re: OT - lost skills

#6

Jim DeLaney, Austintown, Ohio

Re: OT - lost skills

Jim DeLaney, Austintown, Ohio

>Yeah, I spent quite a few hours using the hot wax machine to do paste-ups for ad copies, etc. I think I still have that wax machine around here somewhere... I bet the office supply or art supply stores don't even know what they are by now.

Used to send copy out to have it engraved on copper (big jobs) or cardboard (small runs) plates for repro, too. Bet nobody does that any more, either.

Jim D.

Re: OT - lost skills

#7

Re: OT - lost skills

Norman

>Good subject..

I used to use dusty planers and routers a long time ago, now I've progressed to fancy dovetail saws, hand planes and scrapers.

Another lost art ? But in a good way...

Ha,ha..

Norman

Re: OT - lost skills

#8

Joe McMahon

Re: OT - lost skills

Joe McMahon

>Electronic ignitions were an option on the 1967 Corvette!!!

I am a retired LEO. When I started in 1968, we had to type reports on a manual typewriter. All reports required six carbon copies and were done on thin yellow paper with carbon paper. Our copy to keep was the last copy. You could barely read it! To make the last copy readable, we would bang on the keys. It really didn't help the quality of the last copy and caused holes to be punched by the type keys on the first copy. Very few "O"s or "P"s had a yellow center on the first copy.

Correction fluid came in white or white. An error corrected on all seven pages shined like a new dime on that canary yellow paper. And then there were the times when one piece of carbon paper was put in backwards or a corner would curl up!!! God how I came to LOVE computers before I retired!

Re: OT - lost skills

#9

Re: OT - lost skills

Ron Bauman

>and who can forget "tdc"

Re: OT - lost skills

#10

And

Bill Houghton, Sebastopol, CA

>for motorcycles and VW bugs/buses, the field timing trick of putting cigarette paper between the points, setting the flywheel to the timing mark, and then manipulating the distributor (or equivalent for motorcycles) until the paper just slipped out from between the points - although you had to make sure you'd figured out which way the distributor cam turned, so you didn't accidentally time it on the closing side of the cam (DAMHIKT, but I can testify that a VW timed that way runs even worse than normal).

Somehow, back in the late 1960's, I was always able to borrow a cigarette paper from one of my roommates, even though none of them were cigarette smokers. Funny thing, that.

Re: OT - lost skills

#11

Re: OT - lost skills

Marv....... Northern California Lake Co.

>I never knew how to type until I got a computer. And if it wasn't for my backspace button, you couldn't even read this. Spellchecker is my friend too. Wish we had one in here.

I can barely imagine how anyone could be productive on the old typewriters, especially typing with two fingers. I would have had to buy white-out by the gallon. I think it was Word Perfect that got it all started. I had it on my old 286 that had two floppy drives, one was, I think a 5-1/4" floppy. Maybe 5-1/2" can't remember it's been so long ago. That old computer along with about 4 others are still stored out in the shed.

Marv

Re: OT - lost skills

#12

paperclip

Tony - Memphis

>I always used a paperclip on my '69 bug. And once used a screwdriver for the fuelpump rocker to rock on! Got me home! Ever see the book "How to Keep a VW Running for the Complete Idiot" by Mr. Muir? Great book and even better illustrations.

Tony (used to be known as "Bugman")

Re: OT - lost skills

#13

Re: OT - lost skills

Pam Niedermayer, Austin, TX

>Wordperfect? Nah. Word processing machines started it all in the '70's, made by companies like Lanier.

Pam

Re: OT - lost skills

#14

Re: On Topic - lost skills

ThomD

>When the odd glitch show up in Word I still miss "reveal codes".

In connection with this place, the biggest lost skill is fereting out information on your own. There used to be so little available info, and in many of my interests I never met another person from the same area of interest, that one really had to be good at finding and extrapolating information. With the internet, all that tied up energy from people who never met another person in their craft, or who were strangled for information, has been poured out into a public that just expects there to be people standing around with the info they need and handing it over (as we all do in some subject interest). But it is really a quite extraordianry one time gift to the world that is so difuse in source that it passes largely unoticed.

Once all that info is out there, it will be presumably never be put bac in the box. Over the years I have read the odd article trying to explain the information age in terms of the value of information and the need to spend longer times getting it, while at a certain level of generality it has been a process of devaluing information, and making it so available nobody needs to actually hold it. Of course it still pays if your neuro surgeon has a deep understanding of his field. My wife likes to watch House which is an odd combination of a fictional medical team with near supernatural personal powers, promoting the use of the most expensive automated diagnostic machinery the world has ever seen.

Re: OT - lost skills

#15

Re: OT - lost skills

Bruce, a MN Galoot

>I learned to type on a manual typewriter and managed to get to 60 wpm perfect on one of those beasts, somewhere in the vicinity of 1963.

Fast forward to 1980, and I was the first person in my grad dept to use a word processor (Wang) to produce a master's thesis. My adviser found a couple typos (the WP didn't have a built-in spell check) and I went back to the office, made the corrections and brought him a new copy an hour later. He was amazed.

And I'm with ThomD, I sure miss Word Perfect display codes.

Bruce, your MN curmudgeon.

Re: OT - lost skills

#16

Re: OT - lost skills

Marv....... Northern California Lake Co.

>Pam,

You go much farther back than I do. I didn't start with computers until around 1994. I'm just a youngster compared to you. *smirk* (computer-wise, that is)

Marv

Re: OT - lost skills

#17

Re: On Topic - lost skills

Pam Niedermayer, Austin, TX

>You're still on your own on the internet; but I have to say that I love simply searching for what I want rather than having to read through a 500 page tome for one little fact. Same applies to electronic text in general. In a way, the internet requires much more applied intelligence than taking one tome at its word, you have to put together a lot of texts and exercise judgement.

As to House, while I love Hugh Laurie, I liked him a lot better in Black Adder. House is much more like a slightly less sentimental disease-of-the-week show; or at least in the one or two episodes I've watched. Every episode seems to be structured the same. Did I mention that I don't much like repetition? :)

Pam

Re: OT - lost skills

#18

Re: OT - lost skills

Pam Niedermayer, Austin, TX

>Yeah, I did have a 25 year headstart, just think of all the crudity you managed to avoid. But this speaks to the caution one should take when publishing: be sure you know what you're talking about and don't assume the world started when you did. :)

Pam

Re: OT - lost skills

#19

Don't forget Wang

Greg B�tit, Crown Point, NY

>

Re: OT - lost skills

#20

Re: OT - lost skills

Glenn Madsen near San Francisco

>Word Perfect still runs almost daily on my wife's system, because she won't learn anything else. It's only about 5 releases behind the current one now...

Re: OT - lost skills

#21

OK. Wang, too.

Pam Niedermayer, Austin, TX

>

Re: OT - lost skills

#22

Well, that sounded a bit snippy :

Marv....... Northern California Lake Co.

>

Re: OT - lost skills

#23

I understand Pam's point, though

Bill Houghton, Sebastopol, CA

>I've lost track of the number of times I've risen up in dudgeon while reading the newspaper (my wife has long since gotten tired of it - unless it's a dudgeon she shares!).

One example: the newspaper stories that assume that the civil rights movement started with the Rev. Dr. Martin Luther King - ignoring all the civil rights work done before, not least the founding of the NAACP in 1909, the Tuskegee Airmen, Brown v. Board of Education, the Freedom Riders, and all the less recognized actors on whose shoulders those activists stood.

There's a part of me that thinks no one should get a job at a newspaper without a degree in history...

Re: OT - lost skills

#24

I didn't expect to trigger such a long thread!

Bill Houghton, Sebastopol, CA

>

Re: OT - lost skills

#25

Re: OT - lost skills

Dan Donaldson

>If you run Firefox, there is a spellchecker that works on the WC postings. (or any other form that you fill in. )