Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Got my tools somewhat organized

Posts

Re: Got my tools somewhat organized

#26

Re: Heiji saw

Manny

>How does it compare with a handmade Mitsukawa?

From So in Australia right?

Not that I need more saws. Just curious.

Manny

Re: Got my tools somewhat organized

#27

Re: Heiji saw

Kevin Adams

>No Heiji saws (yet), mine are handmade Mitsukawa (via Iida-san). I have a yokobiki and tatebiki (both 270mm). Very nice saws and well sharpened.

And I'd really appreciate it if you wouldn't tempt me with anything more from So right now as I should be very close to getting my Watanabe-san chisels...he said my set was next right before he left for holiday, so they should be just about ready. These are the special WS#1 bench chisels--I'm anxious to see how they compare to the "sword steel" Imais I have (paring chisels). When So raves about something, you just have to trust him (and open your wallet!).

And thanks for the tip about hanging my saws--they are all "hanging high" tonight and look to be just fine.

Take care,

Kevin

Re: Got my tools somewhat organized

#28

Re: Heiji saw

Wiley Horne--So. Calif.

>Hi Manny,

Yes, they're from So. The only handmade Mitsukawa I have is a 400mm tatebiki, so it's not a good comparison. However, I have a friend up in Canada who bought the $500-600 small katabas from Iida-san, and who also bought a smallish Heiji saw--he then sent the brand-new and unused Mitsukawa's overseas to Heiji to try to get Heiji to do some metate on them.

This is just my take, so use a handful of salt. But Mitsukawa-san has figured out a way to make a living making saws, and he does it by segmenting the market, and then differentiating his product with a wide range of offerings which vary in quality. Heiji-san makes his living making knives, because he refuses to compromise on saw quality. He only does one quality of work. His metate is way up there, and in fact, he is an excellent man to hire for metate on your good saws, though it may cost you $100 per saw. The $500-550 was for white steel #2. He also has some togo reigo stock, and will make a togo reigo saw for $1,500 as I recall. According to So-san, the hand work content is the same on the white steel saw as the togo reigo one.

My Heiji saw came with a burnished finish, clearly hand done, but did not have the 'pebbled' texture that you can see under low magnification on a Miyano saw. The Heiji saw showed some tensioning strikes, whereas I can find no tensioning strikes remaining on a Miyano saw. The Heiji saw is incredibly sharp. I don't mean to sound like I'm generalizing, because I've only seen one Heiji saw.

I've been meaning to say, that was an inspirational sawing job you did to make that pyramid free-hand! So of course you have saws to beat the band. However, if curiosity gets the better of you.....

Wiley

Re: Got my tools somewhat organized

#29

Good points, but...

Scott Burr in Ben Lomond, CA

>That wouldn't work at my house :^(

Thanks for the explanation!

Re: Got my tools somewhat organized

#30

Dang Manny!

Scott Burr in Ben Lomond, CA

>That's quite the hanging party you have there. Was that a tool chest in your first pic? If so I'd like to see more of it.

Re: Got my tools somewhat organized

#31

Re: Hanging dozuki

Marv....... Northern California Lake Co.

>Nice collection you have there Manny......do you sharpen them yourself? If you don't, does it cost much to have them sharpened?

Marv

Re: Got my tools somewhat organized

#32

What's wrong with this picture?

Scott Burr in Ben Lomond, CA

>Oh so many nice chisels,

I drool, I compare,

Orange handled tools

I do declare!

Take this not to heart.

Jealous I will be not.

Re: Got my tools somewhat organized

#33

Re: Hanging dozuki

wilbur

>Hi Manny,

Thanks for posting the pictures! I actually have been looking a lot at the pictures I took in your shop when we met up back in December, trying to get ideas as to how to hang stuff on the wall.

Re: Got my tools somewhat organized

#34

Toolbox

Manny

>Hi Kevin,

It's based on the Japanese carpenter's box design you see in all the Japanese carpentry books. Most people have seen a form of this in Odate's book. Two chisel boxes ride on top of the main box. The main box is made mostly of spanish cedar and the chisel boxes from mahogany and assorted scraps. I wedged those side tenons at an angle with wenge. (by the way, wenge is too brittle. It's not good wedge material)

The lower chisel box is trapped between the two lid battens. The bottom of the upper box is recessed so it fits onto battens on the lid of the one below it. So everything is secure when I carry the box. The dark pieces are just little handles to grab onto when taking off the lids.

The chisel boxes are handmade with dovetails, etc. The main box I whipped together one evening using a Leigh Jig with multiple mortise and tenon attachement. I was in a hurry to get this thing done and retire my Veto ProPac case. The guys kept making fun of me because I never made myself a real Daiku toolbox. :-) However I did handplane the surfaces.


img

Re: Got my tools somewhat organized

#35

Re: Toolbox

Manny

>Here it is with everything open.

The box in the upper right sets on side rails inside the main box.


img

Re: Got my tools somewhat organized

#36

Re: Toolbox

Manny

>I modified the lid to store my sashigane and other assorted layout tools.


img

Re: Got my tools somewhat organized

#37

Re: Toolbox

Manny

>I chamfered one edge to hold my planes as I work. I also made a saw holder that slides onto the side handle.


img

Re: Got my tools somewhat organized

#38

Re: Toolbox

Manny

>The saw holder sits in this side area when not in use.


img

Re: Got my tools somewhat organized

#39

Re: Toolbox

Manny

>Interior shot of the main box.


img

Re: Got my tools somewhat organized

#40

Re: Toolbox

Manny

>The other side.


img

Re: Got my tools somewhat organized

#41

Re: Heiji saw

Manny

>Thanks for the explanation Wiley.

I think Mitsukawa has different levels of sharpening/metate just like he has various saw grades. I found out an interesting thing by accident:

I used to have Hida send out my saws to Mitsukawa for basic metate. They always came back performing as when I bought them; Ok, but not like a Yataiki. One time, on a whim, I told them I wanted "very carefully done metate, all by hand" I think it wound up costing about $80. My rip dozuki came back as a totally different saw. So, now, that's what I order when I send them out for full-on metate.

Now you you've piqued my interest. I may have to try a Heiji. :-)

Re: Got my tools somewhat organized

#42

Totally Cool Manny

Scott Burr in Ben Lomond, CA

>That's one of the nicest chest I've ever seen. Would you be nice enough to explain the joinery of the box it's self?

Re: Got my tools somewhat organized

#43

Re: Hanging dozuki

Manny

>If they need just a touch-up I'll do it myself.

But, for full-on sharpening, metate I'll send them back to Japan, via Hida Tools, and the cost can vary depending on what you want. $30 and above. See my reply to Wiley above.

The steel is hard on these so they don't require sharpening very often. On my most often used saws I would say every two years I'll send them out. If I'm cutting hardwoods it could be sooner. I have one saw with a label "2/02" on it meaning it was last sharpened in Feb 2002. Still cuts well.

There is a guy in the US named Mark Grable that will do it. I haven't used him in years, but I think he still charges around $30.

Manny

Re: Got my tools somewhat organized

#44

Re: Totally Cool Manny

Manny

>Thanks.

It's nothing fancy. Just mortised the ends into the sides with multiple wedged mortises. The bottom and handles were dowelled in. The circles you see on top of the side handles are the dowels. On each end I doweled in, from the sides, some cross members to hold some planes, marking gauge and files.

Manny

Re: Got my tools somewhat organized

#45

Roses smell nice

Greg B�tit, Vergennes VT

>and so does a waffle

but your poetry stinks

something downright awful.

:)

Re: Got my tools somewhat organized

#46

Re: Toolbox

Kevin Adams

>Manny--

Thanks very much for all the photos and descriptions. It is one of the nicest and most practical boxes I have seen. The one thing I'm having trouble visualizing is how do the two chisel boxes fit inside (with the third box)? Are the chisel boxes on top of the third box and held somehow by the underside of the lid? But the lid has tools stored on it as well, so that's where I'm confused.

How thick are the sides of the main box?

Thanks again--this thread is a keeper for when I build a new box.

Kevin

Re: Got my tools somewhat organized

#47

Re: What's wrong with this picture?

Marv....... Northern California Lake Co.

>Scott,

Your last line should read....

And a poet I'm not

*smirk*

Marv

Re: Got my tools somewhat organized

#48

Thanks Manny, that was helpful

Marv....... Northern California Lake Co.

>

Re: Got my tools somewhat organized

#49

Re: Toolbox - and creep

ThomD

>Nice Box, always wanted to build one, but have yet to really see a toolbox that I thought would work for me. I have one that I use but it is more a box in which I carry stuff, rather than a box I have organized like yours

One thing I notice with yours is it appears you have individual spaces for each chisel, yet overcrowding appears to have caused some chisels to double up. That is one thing I had with the wall mounted pegs. Starts out holding one thing, and as the years go by other things get added. One of my saw racks is like that. The design I mentioned has horizontal shelf structure to it, so little bits an pieces have found their way in there even in some cases stuff has been put behind. So far my chisel racks are the most successful in avoiding that kind of stuff. Each pocket holds only one chisel. Others can be put there, but they are custom made to a given chisel each pocket reamed to that chisel's dimensions. It isn't possible to put other stuff in at the same time. And they take up less space that most anything else I have tried. I have started putting stuff behind them, but to that extent it is so far stuff that doesn't interfere with the efficient use of the chisels.

It would be cool to see some of your hanging solutions if Wilbur has pictures... My walls have continuous French cleats and tool racks or cabinets on them. I don't have enough space. I preffer tressle bases on my benches, but the amount of storage in a Shaker type bench is really necesarry for anyone who accumulates tools as many moderns do. I don't know enough about their working conditions, but it is interesting to speculate that they were among the first to have both power/fixed tools in their shops and hand tools. A set of hand tools is not a big deal to house. But along with power tools, several sets of accumulated favorite tools, hobby supplies etc... It can mount up.

Re: Got my tools somewhat organized

#50

Re: Toolbox

Manny

>The two chisel boxes don't go inside the main box. They sit on top as shown in the first photo. So, it's a stack of three boxes; main box and two chisel boxes. The layout tools reside on the underside of the main box's lid. So, when the lid is on they are inside and not visible. The lid is trapped by the top cross members on each end. You remove the lid by sliding it to the right and lifting up on the left side.

This picture better illustrates how they stack.

Those two strips tacked onto the lid of the middle box fit into the bottom recess of the top (smaller) chisel box to prevent it from sliding off as I'm carrying the stack. Yes, it can be heavy at times....


img