Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Kayoko's Imai sword steel chisels... where?

Posts

Re: Kayoko's Imai sword steel chisels... where?

#26

Re: Your shaving horse

Pam Niedermayer, Austin, TX

>Good points. I didn't intend to make it sound sinister, though, just calculated.

Pam

Re: Kayoko's Imai sword steel chisels... where?

#27

Re: Your shaving horse

ThomD

>I built one of those about 10 years ago from the pics in a piece on Boggs, and before I was done I got the plans Country Workshops made up. I used rock maple. I like it, though I can't say I particularly prefer it to the dumbhead horse in the Langsner book.

A lot of reasons Boggs gives for doing things his way relate to a guy in his situation. This is a little like those ads for sleeping bags that use pictures from an Everest expedition. It is reasuring to know what the experts use, but on the other hand, their circumstances vary from mine. I really don't have to worry about efficiencies required to turn out 9 thousand rung orders. Boggs also does certain things to a lower standard in the sense that he may have some parts he is making from scratch and other parts he is just scratching the surface of to apply a hand tool finish. In my case I am a lot less specialized. Making a hay rake one day and a chair part another. I am unlikely to spend so much time on the horse I get bedsores.

Re: Kayoko's Imai sword steel chisels... where?

#28

Re: Your shaving horse

ThomD

>My recollection is that he said LN would be offering the full plans. But they seem to have decided to make the horses instead. I think the only sneaky thing about the ratchet is that there is a bungy return string or something. I don't remember exactly. I never got around to it on mine.

I looked it up, the story is in FWW 139, that issue with the chisel review fiasco on the cover. Boggs uses a piece of inertube attached to the cog so that it pulls the cog into a notch. Bungy should be better. The tube attaches under the cog, and is routed back under the bench where it is attached to the underside. The article in 139 does have a detailed exploded diagram, and some major dimensions it would be easy to scale up into actual plans. I guess mine is more than 10 years old since that article came out in 1999.

Re: Kayoko's Imai sword steel chisels... where?

#29

Re: White and blue steels, water and oil

wilbur

>Hi Alan,

Making a chisel is just about the same process as making a plane blade, just a skinnier piece of steel. Actually pieces, given the hard and soft layer. The hard and soft layers pretty much start off flat, and I think that the curve in the lamination line is a result of the hammering. I have seen Japanese chisels with fairly flat and very curved lamination lines, with the curves being more prominent with thinner chisels. Plane blades tend to have flatter lamination lines than chisels, probably because they are wider to start with.

Re: Kayoko's Imai sword steel chisels... where?

#30

Re: White and blue steels, water and oil *LINK*

wilbur

>I found another video that shows a Japanese chisel being made. The chisel part starts about 1 minute into the video. Supposedly, Tasai is the toolmaker in this video.

Again, Japanese audio, etc.


Japanese chisel making video

Re: Kayoko's Imai sword steel chisels... where?

#31

Re: Your shaving horse *LINK*

kees------WebKitFormBoundary2v945VoJNv+YtMLQ

>http://countryworkshops.org/shavingmule.html


http://countryworkshops.org/shavingmule.html