Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Milling Osage, Or While my chainsaw gently weeps

Posts

Milling Osage, Or While my chainsaw gently weeps

#1

Milling Osage, Or While my chainsaw gently weeps

Dominic in Buck's County PA

>Hi everyone,

Today I finally had a chance to cut up some osage orange logs that were sitting in my wood pile (I say "finally" because events over the past several weeks had conspired against me). :>)

Photobucket

Photobucket

I broke out the chain saw and went at it. Thank goodness I had a new blade installed! This wood had been sitting in my wood pile for about 4 or 5 years. So it had gotten a bit on the hard side (which osage tends to do with a vengeance when it ages). However, it was still somewhat wet, and it was as yellow as sunlight on the inside. I think my chainsaw got spoiled by only cutting up cherry and walnut. It's a Stihl and can handle just about anything I throw at it. But I was pampering it a bit. It definitely got a shock when it bit into that osage! I think I can still hear it muttering to itself! :>)

It's weird but when I used to see logs all I would think of is "bowl blanks". Now when I see logs I think, "Wooden Plane bodies" or "Mallet blanks", or "tool handles". And when it's hard dense wood like Osage, it's even more so.

After I milled it up, I should have checked the moisture content. But I was too concerned about sealing the end grain and writing a date on it. I forgot to write the date a couple times and don't feel like playing that kind of guessing game again!

I got a bunch of nice 4"x4"x16" billets, some 5" x 6", as well as some smaller 1 1/2" sq ones. I got a couple with cracks in the ends. But they are destined to be cut up for smaller projects like tool handles. Most of the big stuff looks pretty darn good. I'm hoping I can get at least a couple of plane bodies out of them. I'm also thinking that at least one of the larger blanks will become a mallet. I like the cherry one I turned this past summer. But I want one with more authority. :>)

See ya around,

Dominic

Re: Milling Osage, Or While my chainsaw gently weeps

#2

Sweet and lovely

Bill Houghton, getting sunny in Sebastopol, CA

>That's one of the woods you don't find out here on the Left Coast (though we have madrone and some other nifty woods to compensate).

Your chain saw's earned its keep; unless you've got a ripping chain, ripping is generally pretty hard on a chainsaw anyway, and hard hardwoods even more so.

Re: Milling Osage, Or While my chainsaw gently weeps

#3

Re: Sweet and lovely

Robin Corell in Atascadero CA

>I've seen a hedgerow or two of osage orange around Vacaville. and a scatteed tree or two around San Jose. They are around you just have to look for them. A good and plentyful substitute is mullberry. The wood looks very similar when freshly cut and ages similar and is nearly as hard.

Robin

Re: Milling Osage, Or While my chainsaw gently weeps

#4

Re: Milling Osage, Or While my chainsaw gently wee

ThomD

>Good score. I got some once from the woodpile of a historic house my wife was then working at. It is amazing what people just cut up and trash. Even a mallet is a bit of a blunt instrument for a wood that makes excellent guitars, and bows. If one has a source of good quality it is right up there with anythign you would care to name. I got a load sufficient for coffee tables at one point, though I haven't felt good enough about that use that I have made the table yet. I made one out of cherry instead. Too bad the wood is often bad quality. A pal knew a guy who had a fence row of 3 footers. He kept trying to talk the guy out of them but the guy just loved burning them in his hearth so much he probably would have used the Mona Lisa for kindling, if so required. As Sartre said: "Hell is other people".

Enjoy!

Re: Milling Osage, Or While my chainsaw gently weeps

#5

I'll trade you some ...

Scott Burr in Ben Lomond, CA

>Grande Toro Achicia PooPoo for a few chunks that Dom.

Re: Milling Osage, Or While my chainsaw gently weeps

#6

Dominic in Bucks County PA

Ok,.....I GOTTA ask!

Dominic in Bucks County PA

>What the HELL is "Grande Toro Achicia PooPoo"!?

:>)

Later,

Dominic

Re: Milling Osage, Or While my chainsaw gently weeps

#7

Re: Ok,.....I GOTTA ask!

Glenn Madsen near San Francisco

>Grande is Spanish for large.

Toro means bull in the same language.

The rest you can figure out yourself. ;-)

Re: Milling Osage, Or While my chainsaw gently weeps

#8

You forgot Acaica ...

Scott Burr in Ben Lomond, CA

>Is a trash tree wood from my yard.

Re: Milling Osage, Or While my chainsaw gently weeps

#9

Re: You forgot Acaica ...

Glenn Madsen near San Francisco

>The wood turners in my group absolutely LOVE Black Acacia. If that's what you're trashing, let me swap firewood with you!

Re: Milling Osage, Or While my chainsaw gently weeps

#10

I wish...

Scott Burr in Ben Lomond, CA

>It's the nasty kind that blooms yellow flowers 4 times a year that only elephants like.

Re: Milling Osage, Or While my chainsaw gently weeps

#11

Re: Milling Osage, Or While my chainsaw gently wee

R.J. Whelan

>Dominic ... I agree that this is beautiful material, but I would caution you about building planes with it. I built one from some osage that came from the Omaha area and it moves around (seasonally) a lot (mine is a laminated, Krenov, style - maybe a coffin body would be more stable). I still have it and at the ripe old age of 9 years it's still maturing (I'd guess it's entering puberty about now). On the other hand the same batch produced my two favorite mallets.

Good luck with yours .......... rj

Re: Milling Osage, Or While my chainsaw gently weeps

#12

Dominic in Bucks County PA

Thanks for the heads up RJ

Dominic in Bucks County PA

>Thanks for telling me about the wood movement RJ. I'll probably let this dry for a couple years before even attempting anything like building a plane. But then again, I just realized I have a nice big hunk of bubinga and some rock maple that would work great together for a plane!