Reinforcing Warren's observation re water
Wiley Horne--So. Calif.
>Hi all,
Found one of the Jeff Jewitt references I have been searching for. This one is the book Hand Applied Finishes. On pp. 94-95, he presents a series of simple tests, which compare the resistance of dewaxed shellac, water-based lacquer, and solvent lacquer to various substances and scratching procedures.
Let me start with water, since Warren called me on that one. Jewitt tested cold water by placing three ice cubes on the finish and letting it sit overnight (12 hours). All three finishes 'passed'--no visible damage. He then tried 150F water, poured on the panel and a coffee mug placed in the middle of the hot water for 5 minutes. Results: All three panels passed with no visible damage. When boiling water at 212F was used with the coffee mug, the shellac failed, but both lacquers passed. Moral 1: Don't pour boiling water on shellac. Moral 2: Listen to Warren.
Now for alcohol. Jeff used a series of dilutions. 10% alcohol, simulating wine; then 50% and 100% alcohol. Ethyl alcohol placed on the finish for 5 minutes. Results: All three finishes passed the 10% alcohol test, no damage noted. At 50% alcohol, shellac failed, as did water-based lacquer; solvent lacquer passed. At 100% alcohol, all finishes failed, though solvent lacquer did better than the others.
As for other issues....Shellac failed applications of ammonia, acetone, and scratches with hard pencil (1H and higher). Shellac passed applications of mineral spirits, vinegar, and scratches with soft pencil (B and 2B).
Jewitt does not list water damage as a particular threat to shellac, dewaxed in this case. Warren is right. Though I am still looking at a white ring, which Jewitt says can be taken off by wiping lightly with alcohol--not ringing wet alcohol, 'dogs nose' alcohol.
Wiley