Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Help with drawknife maker name

Posts

Help with drawknife maker name

#1

Help with drawknife maker name

Bill Houghton, Sebastopol, CA

>I stopped by to visit my uncle today, and it turned out his senior community was doing a white elephant sale. Several white pachyderms followed me home (inventory below), including a folding handle drawknife in decent shape with a partial stamp. I'm hoping someone can help with the maker name. It reads, "XXXX Edge Tool Works" on the first line, X'es obviously standing for a word I can't read, and "Winsted, Conn., USA" on the second.

Other elefunks:

*Sweetheart era No. 52 (my favorite pattern!) spokeshave

*E.C. Simmons 9" try square in good shape and pretty square (silly for me to have purchased it, since I tend to use combo squares, but for the price...)

*Sargent version of the No. 78 duplex rabbet, depth stop but no fence, and that strange nicker that looks like the knife from a pizza slicer with a chunk taken off and teeth filed in part of it (anyone know if there are other uses for that than just nicking to explain its shape?)

*Unknown maker but no doubt man-made combo sharpening stone, 50 cents in good shape

*Little leather pouch that, after I cut the bottom off, will make a good pouch for my combo square on my Normite toolbelt.

$24 the lot.

Re: Help with drawknife maker name

#2

Witherby or Maybe Winstead *LINK*

David Miller from Iowa

>See Link


Witherby/Winsted Blurb

Re: Help with drawknife maker name

#3

Don't think so

Bill Houghton, Sebastopol, CA

>The maker's stamp is laid out justified left, as best I can tell - that is, the second line starts, at the left, just below the first line. If I'm right, there's enough room for about five characters in the space.

Seems like I've seen a reference somewhere to the "Union Edge Tool Co.," but I sure can't find it now. That'd be about right, but I'm not sure if I'm creating a memory, something I do more and more as the brain cells fill up, or short-circuit, or whatever it is that's happening to my brain.

Re: Help with drawknife maker name

#4

Re: Don't think so

Jack F

>There is a Winsted Edge Tool Works drawknife on ebay with a good picture of the makers mark. Something to compare with anyway.

Re: Help with drawknife maker name

#5

Yep, you and David Miller are right

Bill Houghton, Sebastopol, CA

>Winsted it is. I thought sure the two lines of the factory mark would be aligned at the left, but they're not - the top line is offset to the left by two letters, which lines it up perfectly with the incomplete mark on mine. The handles are also identical.

Mine's got a little more age on the steel, but better paint on the handles, than the eBay item - but I've got cool folding handles and paid $10, about a third of what I guess this one will go for. I do need to do a little work on those folding handles - they register on what are basically carriage bolts in the body of the knife, and the square of the carriage bolts has gotten kind of bunged up, so they don't sit flat.

Still...gloat gloat gloat.

Re: Help with drawknife maker name

#6

The irony...

Bill Houghton, Sebastopol, CA

>is that I'm doing less work in the field than I used to, so finally having a folding drawknife is less important than it would have been 20 years ago (when I couldn't have afforded a $10 drawknife anyway).

I've been pleased to see that my younger son, who has carried my interest in tool use to the next level, is acquiring some of the tools I lusted after for years (to use! to use! not just to have!) earlier in his life.

Re: Help with drawknife maker name

#7

Re: The irony...

Robin Corell in Atascadero CA

>I have a 2" Winstead Edge lathe chisel with a similarly obscured makers mark. When I first got it I thought it said Wasted Edge. I thought that was a wonderfuly ironic name for a lathe tool manufacturer and still sometimes refer to all my lathe tools as wasted edge tools.

I very much appriciated the link to that great mongraph on the history of winsted edge/witherby.

Robin