Bally Block trip (one GREAT day!)
Dominic in Buck's County PA
>Hi gang,
Today my buddy Mike and I headed out bright and early in order to make our much awaited pilgrimage to Bally Block. For those of you who do not know the name, they manufacture butcher block counter tops. They also sell off the "seconds" at a fraction of their wholesale cost.
Here are the directions in case you're interested.
Take the PA Turnpike to the Valley Forge Exit (Old Exit #24), proceed on to Route 202 South. Look for the Route 422 exit toward Pottstown. Proceed on Route 422 for about 20 - 25 minutes (give or take). Look for the Route 100 North exit. Bally Block is located on Route 100, just north of Pottstown PA. When you proceed down Route 100 through the small town of Bally, look for the Bally Hotel. They are directly behind it.
Here is the address:
Bally Block
30 South 7th Street
Bally, Pa 19503
Tel: (610) 845-7511
I had called Bally Block early on Thursday morning to see if seconds" were available. I spoke to extremely nice woman named Barb who then directed me to speak with the shop foreman, Russell. Russell told me he had a bunch of Birch and some assorted maple butcher block counters. He also said he had numerous scraps laying around. I asked about stopping by on Saturday and he said they'd be there until Noon.
When I got there, I met up with Russell and he brought me and my buddy Mike over to their drying and storage area across the street. Once there he showed me a PILE of recycled tops. These were ones from a former Army Base shop. Some of the tops were somewhat beat from use. But the bottoms were PRISTINE! There were 3", 2" and 1 3/4" thick tops in a variety of widths and lengths. Some were maple and other were birch. He showed us some really really nice 2'x 4' x 1 1/2" thick pre-finished birch butcher block tops that looked brand new. These were for sale for $30
Mike and I both got (2) 30" wide x 6' long x 1 3/4" thick maple butcher block tops for $50 each. We also each picked up some of the small pre-finished 2' x 4' x 1 1/2" thick birch table tops. The photo below shows them.
I then asked if he had any scraps he wanted to sell. I use these to make cutting boards that I give to my family as gifts. Russell walked us back over to the production shop and he started SHOWERING us with scraps. Most of these he GAVE to us. The happier we looked, the more he kept giving us. He gave me some sections of birch counter top that would make perfect mini lathe benches. He then pulled out some Lyptus wood scraps and I nearly fainted. He told me is was the toughest, hardest wood he's ever worked with and that I could have as much of the scraps as he had. I got some nice pieces that I intend to make tool handles from. Then he gave me some 6" wide x 40" long x 4" thick maple butcher block scraps. These I'll use to replace the faces on my veritas twin screw tail vice.
I then stumbled across an 18" wide x 5' long x 2" thick piece of BB Maple. I asked how much and Russell said "$10." I said "SOLD!"
We loaded up a dolly and proceeded to transfer it all into the back of my truck. All the time Russell kept coming up to us with more and more free scraps. At one point we had to turn it down because we had no more room left in the truck!
On the way back Rt#100 we ran across a Flea Market and decided to stop in. I picked up a 10" Pexto ratcheting brace for $5 that was in fantastic shape.
Boy, what a great day!
See ya around,
Dominic






