Re: Bill, can you tell us about how you make the t
Bill Tindall, E.TN
>I'll make a picture when we make them, which will be shortly. Al the ones I have now are buried in a handle.
Knowledge You Can Build On — Est. 1998
Re: Bill, can you tell us about how you make the t
Bill Tindall, E.TN
>I'll make a picture when we make them, which will be shortly. Al the ones I have now are buried in a handle.
Re: Some chisels
Pam Niedermayer, Austin, TX
>Nice looking chisels. What advantage do they bring to luthiers by not having side bevels?
Pam
Re: Guitar/Glue chisels
ThomD
>Thanks, Pam. The inside of a guitar is open enough there aren't any clearance issues. They only make one size, and they call it a Schneider glue clearing chisel. When the braces are glued in, this chisel cuts out the squeezeout. For that purpose the bevel on the end being square is a little more efficient at lifting the glue. People also use them for carving braces and general cutting. Like anything that sits on the bench it has one hundred uses. That is why I made two other widths, and a fourth chisel with a tighter curve for getting into scallops.
My favorite part of the build was that I couldn't lay my hands on more bronze ferules. So I heated some stainless till it oxydized bronze and it matches well. I cut it after it oxydized so the ends aren't right, another time....
The original one wasn't as expensive as I thought: They only want $63.50 for it.
Re: Funny...
ThomD
>The description of the Schneider chisel sayd "specially ground bevel". It's about as standard a grind as one will ever find on a chisel!!
Re: thanks to all
ThomD
>I like simple handles on Chisels. The Japanese ones are pretty good, though the taper may be in the wrong direction for best use, until you drop it on your foot... I always thought the Lie Nielsen ones were pretty Japanese. They must have dropped the Stanley catalog behind a filing cabinet.
http://www.lie-nielsen.com/catalog.php?grp=1347
I like the smooth handles because they don't dictate how you have to use the chisel. Maybe a groove is best for a certain grip, but what about the other 1000 grips? Most uses just float the wood away so one rarely has a white knuckle grip. Th top can be nicely rounded for shoulder pressure. Making a really good looking simple handle is a pretty refined detail.
Re: Sets?
ThomD
>"It is not an exaggeration that the time I would spend buying chisels on Ebay and getting them in usable condition would be greater than making a set"
I bet you are right about that. For me it would be similar actually doing all the steps myself, versus contracting them out, though I know you can't do that with your steel.
I have lots of sets of chisels, but I am not sure that paring chisels work the same way. Depends what a person pares. If they are too timid to chops stuff like dovetails, then maybe. But are there as many internal applications for paring chisels that require a lot of increments? The classic Japanese set is 4. Though I have something like 10, It is one of my few extravagances.
I looked at that last sentence and the part about "few" set off my BS detector.
"Wing walking"
Wiley Horne-- So. Calif.
>Hi Thom,
I suspect Hap still has all those varieties of chisels. But. One day a couple of years ago, he up and jettisoned his site store hardware, and began installing new store hardware in its place. That was a couple years ago. He still doesn't have an online store. You gotta call or email if you want to know if he has something, and what it costs.
At work, we used to talk about 'wing walking'. Remember when the daredevils used to walk on biplane wings? The principle of wing walking is that you don't let go of one strut before you've got a grip on the next one. It applies to things like changing jobs. Also to software changeouts.
Wiley
Re: "Wing walking"
ThomD
>Hadn't heard that one, myself, cool.
I got a message from him saying it worked and did I do X. I haven't been back yet. The thing was that it has easy ways into every other store but the woodworking one, yet it is the old woodworking front...
Re: Funny...
Pam Niedermayer, Austin, TX
>Stewart MacDonald also has one of these with better photos for $8 cheaper, pretty cool looking.
Pam
Sorry, But I disagree Ellis...
Scott Burr in Ben Lomond, CA
>I feel a longer handle doesn't buy much in terms of judging how perpendicular (or square) the chisel is to the work. I find a long blade is better suited for this and also for getting into deep mortises.
This is why I like the old English patterned ones. The ones where the blade this thin, tapered on the sides and about a foot long.