Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Not all tools are good looking...

Posts

Not all tools are good looking...

#1

Not all tools are good looking...

Stephen Shepherd in the State of Deseret

>and here is an example. This tool belongs to a friend and I have talked him into letting me restore it, as the wooden handle is replaced.

What is unique about this Cabinet Scraper is the iron toe piece, which is finely finished and quite large. The nice little cove molding around the bend from the base to the blade holder. There is leather between the iron toe piece and the wooden handle. The handle is a replacement as it is made from two pieces.

Stephen


img

Re: Not all tools are good looking...

#2

Re: Not all tools are good looking...

Stephen Shepherd in the State of Deseret

>and here is why.

Stephen


img

Re: Not all tools are good looking...

#3

Are you sure?

Todd Hughes

>What makes you think the handle isn't original? have you seen one of these scrapers befor and did it have a different handle? If you don't know what it looked like originaly how are you going to "restore it"...Looks awful well made to me to be a replacement and I wouldn't just take it for granted that it was because it is made out of two pieces.

I have never seen a scraper like this and it could be a pretty rare piece that is known for having two piece handles...I don't know maybe the handles are well done replacements but I would want to find out for sure befor I go and monkey with it.

Personaly I think it is a quite attractive tool as it is.....Todd

Re: Not all tools are good looking...

#4

I'm with you, Todd, it's beautiful, sensual.

Pam Niedermayer, Austin, TX

>

Re: Not all tools are good looking...

#5

looks kind of like Bevo after the Aggies got done.

Parisian, VL

>

Re: Not all tools are good looking...

#6

Fairly sure

Stephen Shepherd in the State of Deseret

>Todd,

I have seen two vintage winged cabinet scrapers with metal toe pieces, one was in walnut burl and the other I think was ash burl (could have been chestnut). And they were finished much nicer than this example. Something that also makes me think the handle is replaced is that the metal does not match the wood where they come together on the top.

I will definitely take a close look at the tool again to be sure as I don't want to bugger things up.

I refer to the tool as a butt crack scraper, others see cleavage.

Stephen