Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Two rulers & a pencil . . .

Posts

Two rulers & a pencil . . .

#1

Two rulers & a pencil . . .

steve mackay

>to locate positions with only two hands. VERY frustrating when one of those hands isn't a hundred % any longer. Dad (tool & die maker and still pines for Lufkin), keeps telling me I keep wanting tools that have'nt been made for fifty years. For $15 life is easier now. VERY excited !


img

Re: Two rulers & a pencil . . .

#2

Re: Two rulers & a pencil . . .

Victor Parisian

>So, Steve what am I looking at? I have never seen one of those b-4.

Victor - in soggy Houston

Re: Two rulers & a pencil . . .

#3

Re: Two rulers & a pencil . . .

steve mackay

>Sorry. Kind of a combination square but with two rulers instead of one. Both clamp down and are adjustable. I can set-up the X & Y for a spot on a work piece and repeat it for as many pieces as I've got going.As opposed to laying a ruler width wise, mark it, then going length wise and mark it. More accurate and repeatable than dividers also. Not to mention its old and pretty cool to boot. But then, I'm easily impressed !

Re: Two rulers & a pencil . . .

#4

Those old machinists knew their stuff

Bill Houghton, Sebastopol, CA

>If you've got a long rule the right width, you can use it as a depth gauge over large areas - for instance, if you were wasting out the low area of a piecrust table. It's a neat attachment.

Re: Two rulers & a pencil . . .

#5

Starrett still makes them *LINK*

Bill Houghton, Sebastopol, CA

>but I suspect you'd pay a bit more than $15.


289 series attachment for combo squares

Re: Two rulers & a pencil . . .

#6

Re: Starrett still makes them

Robin Corell in Atascadero CA

>I sometimes use mine on a combination square to turn it into a height guage. it can be very acurate for setting router bit heights when you are trying to locate a fillet at a particular height rather then the total depth of cut.

Re: Two rulers & a pencil . . .

#7

Re: Two rulers & a pencil . . .

wayne anderson

>These attachments come up on eBay all the time, and usually go pretty cheap. I've got a couple, but seldom use them since I have tons of other stuff that do the same thing, like combi & double squares, depth gages, marking gages, etc. But, it is a good tool to have in a traveling kit, since it is very compact and versatile, and occasionally you will need it to get into tight areas. I love to collect old machinist layout tools. It's a sickness...;^)

-w

Re: Two rulers & a pencil . . .

#8

Holy cats ! . . .

steve mackay

>Never occured to me that this could be used WITH a combination square ! Opens up even more possibilities ! Thanks !