actually, it's not much of a problem--never was
Larry Williams
>Pam,
I believe David Denning was pretty accurate in his book, The Art and Craft of Cabinet-Making, first published in the 1890's. He wrote:
"....For instance, our friend the joiner, working, as has
been said, principally in pine, would find that the fillister
is not so suitable as the rabbet-plane for making a rabbet in
hard-wood furniture, a fact which the trained cabinet-maker
is aware of, and so very probably does not even possess a
fillister, the use of which would be somewhat inconvenient to
him on that account even in 'deal' work. ..."
In other words, the moving fillister was a carpenter's tool. You might find them useful for roughing out rabbets in hard woods but I'd stay back from the gauge lines in that case. Finish up with a rabbet plane with the appropriate pitch. I've found I favor straight rabbet planes, straight as opposed to skewed. This way even grain reversals within a board are no problem. Just turn the plane to work with the grain through any difficult situations.
I've gotten quite fond of straight rabbets, so much so I can't imagine obtaining a skewed one until I had a full range of sizes of straight rabbets.