Re: Here is mine
Stephen Shepherd in the State of Deseret
>Tony,
I ordered a roll of 1/4" 11 ppi bandsaw blade, cut and punched them myself. I had to heat the blade up, place it in a metal vise and pound it over. It takes three heats and I didn't bother to reharden the blades, they are fine and I have never broken one, nor do I know if any have broken.
I then resharpen the back teeth to crosscut, fast and quick.
I have been tempted to try it on a coping saw blade, but I don't have a real small vise. Fret saws at least the fine ones I use can make the turn in their kerf.
Stephen