Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

My new Heiji ryoba (long, lots of pics)

Posts

Re: My new Heiji ryoba (long, lots of pics)

#26

Re: More Heiji stuff

MikeW

>Hi Wilbur,

White Oak can be as difficult as Red Oak. It's the nature of the wood.

What I would advise is that regardless of the wood, never force the cut with your saw. Bad things can happen more quickly than you will be able to prevent them.

Every saw to a lesser or greater degree, even one of the same specs by the same maker, will saw different. Sometimes it is only the feel that is different. Other times it is actual performance, but I don't mean "good" versus "bad" performance. Just different.

Take care, Mike

Re: My new Heiji ryoba (long, lots of pics)

#27

Re: More Heiji stuff

Pam Niedermayer, Austin, TX

>For sawing two handed, I assume that for this you have to clamp or hold the wood down somehow? I think one reason that I have been primarily sawing one handed is that I often will make a cut by placing the board on my bench, kneeling and/or crouching down in front of it, and sawing in a vertical manner so that the pull stroke clamps the board to the benchtop. I can't see doing this cut two handed without some sort of mechanism to hold the board. I'm sure that this is an obvious thing, but I wanted to be sure that I didn't miss something.

Also, do you use a two handed technique for dovetail-type cuts?

After trying the crouch/kneel method on a standard height bench, I decided it wasn't helping my back and my strength felt diminished. I really like the idea, though, and if I have pieces to process that are too long for vertical clamping, I lay them on the bench and go at it. I've often thought briefly about a 48" bench/platform. :)

No, I use single armed sawing for dovetails.

Pam

Re: My new Heiji ryoba (long, lots of pics)

#28

Re: More Heiji stuff

Wiley Horne--So. Calif

>Wilbur,

I'm sawing joinery in a vise, so that frees up the two hands.

I use two hands to get myself 'centered'. Even with a tiny little 180mm 22ppi saw. It's for control, not for applying pressure. I can feel the teeth feed into the wood better, and it's like I can 'see' better. I am close to ambidextrous, and do some things (football, basketball, writing) left handed, and other things (baseball) right handed. There may be some confusion in my 'handedness', and that's why i want to get both hands on the saw to resolve any conflicts.

Anyway, I think you would know instantly if two hands are better for you or not. It'll click with you or it won't. I'm under the impression that one hand is more the norm.

Wiley