Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Skew Plane Question Answered

Posts

Skew Plane Question Answered

#1

Skew Plane Question Answered

David Miller from Iowa

>One needs every model of every plane.

My transitional drawer


img

Re: Skew Plane Question Answered

#2

My Block Planes

David Miller from Iowa

>I could go on, but you get the picture


img

Re: Skew Plane Question Answered

#3

Re: My Block Planes

Ace Karner

>All I can say is "I guess I don't know what a skew plane is", or I don't understand the question, if those planes answer the skew plane question.

Re: Skew Plane Question Answered

#4

I think you have the wrong subject title David...

Scott Burr in Ben Lomond, CA

>Never the less...


img

Re: Skew Plane Question Answered

#5

Moses Yoder

Re: Skew Plane Question Answered

Moses Yoder

>I used to think that was really cool, but now not so much. In looking throught "Workbenches" I am struck by the lack of excess in the shop. I think a good question is "Why do you need 40 block planes. Why not have three that work good and are sharp?" I love to buy tools when they are cheap, and sometimes even when they are not cheap. For instance, I found a Millers Falls #1 drill this weekend and paid $18 for it even though I have plenty of drills and will probably never use it. Why would I do something that stupid?

Re: Skew Plane Question Answered

#6

Re: Skew Plane Question Answered

Pam Niedermayer, Austin, TX

>It's the reptile part of your brain, very primitive area, which says "Ooh, that feels so good, do it again." Advertisers try their best to appeal to your reptile brain.

Pam

Re: Skew Plane Question Answered

#7

LOL I guess that makes me an Iguana :-)

Bob Demers

>

Re: Skew Plane Question Answered

#8

:)

Pam Niedermayer, Austin, TX

>

Re: Skew Plane Question Answered

#9

Drills? Someone mention drills?

Marv....... Northern California Lake Co.

>Moses,

I'm still trying to figure out how so many tools have gathered around me here. Below is a picture of a few drills...not sure if I have a No.1 Millers Falls though. I'm thinking that collecting is some kind of sickness. Probably my parents fault. I don't even use these drills. When I need to drill a hole, I use my 18v cordless or my drillpress.

Marv


img

Re: Skew Plane Question Answered

#10

Ummm Marv...

Scott Burr in Ben Lomond, CA

>Do you wear pearls and heels in the shop?

Re: Skew Plane Question Answered

#11

Moses' Question

David Miller from Iowa

>It isn't in the "having" of many planes - no one needs that many. It is the "quest" - the anticipatory thrill that the next booth at the flea market will have a nice plane at a bargain price. For me, it makes my days much more fun - I guess I am addicted to anticipation. It also provides topics for learning the minutae about various things - In addition to tools, I collect pitching horsehoes, reel lawnmowers, vintage guitars, archery stuff etc. The real thrill comes from having invested the time and trouble to know the true treasure from the mundane and then actually finding it. I scored a super rare set of Allith pitching horseshoes last week at a junk shop and still have a bit of a buzz going from that.

Re: Skew Plane Question Answered

#12

OK, David, I'll bite

Bill Houghton, Sebastopol, CA

>and how do pitching horseshoes differ from regular shoes that go on horses?

Re: Skew Plane Question Answered

#13

I have a new challenge

Bill Houghton, Sebastopol, CA

>Who can post a picture of a shop with just one of a particular tool?

Re: Skew Plane Question Answered

#14

Re: OK, David, I'll bite

Marv....... Northern California Lake Co.

>Bill,

Tournament horseshoes are are all common in weight. They all weigh 2-1/2 lbs. Lots of different designs, but all will have the same opening dimensions between the hooks and outside to inside dimensions are all the same. During major tournaments such as the world tournament, shoes are measured and checked to meet certain specifications. The overall shape of a shoe can vary widely.

Shoes that are made for horses are all different sizes to fit a particular size horse.

Marv

Re: Skew Plane Question Answered

#15

Say, Marv. I'd like top see....

Todd O. Cronkhite Maine Native, Presently Away

>and hear more about that hand crank grinder. I've never seen one like that and it really caught my attention.

T.O.

Re: Skew Plane Question Answered

#16

Re: Say, Marv. I'd like top see....

Marv....... Northern California Lake Co.

>Hi Todd,

I found that thing on eBay a few years ago. I thought it was a grinder when I got it but it didn't have a grinding wheel with it. In order to fit a grinding wheel on it, I had to remachine the arbor. The driver gear is interesting in that the teeth are inside, opposite side that you see and it is a diecast aluminum gear. After I got the thing working as a grinder, it occured to me that it wasn't designed as a grinder. It's high profile is intended for a hand winding application of some kind. Maybe winding rope or wire for example. So anyway, it's a grinder now whether it wants to be or not. If I had known that it wasn't a grinder, I would not have changed it into one. I wish I could find another one but with the original parts.

Marv

Re: Skew Plane Question Answered

#17

Todd, another interesting old grinder

Marv....... Northern California Lake Co.

>Hi Todd,

If you are interested in old hand grinders, below is a Keen Kutter with all it's pieces and parts. After I scraped and cleaned all the grease and grung off, I discovered a hairline crack across the middle of the back casting. Rather than weld it, I reduced the diameter of an 8" circular saw blade and bonded it on the inside of the casting with the use of JB Weld. The shafts were loose, so I machined them and pressed in new brass bushings. It measures 13" from top to bottom of the clamp screw. Looking at the outside, no repairs are visible and it now works as good as new.

Marv


img

Re: Skew Plane Question Answered

#18

Re: Say, Marv. I'd like top see....

Todd O. Cronkhite Maine Native, Presently Away

>"After I got the thing working as a grinder, it occured to me that it wasn't designed as a grinder. It's high profile is intended for a hand winding application of some kind."

-DOH!!

Thanks for the info tho. Now I won't be wasting allot of tome looking for a handcrank grinder like that. I kinda like those handcrankers. I've slowed down considerably on accumulating tools but wouldn't pass up an unusual handcranker from time to time.

Re: Skew Plane Question Answered

#19

Re: Todd, another interesting old grinder

Todd O. Cronkhite Maine Native, Presently Away

>That is way cool Marv! I've never seen a handcranker with a wheel guard either. Good job on the repair/save on it.

T.O.

Re: Skew Plane Question Answered

#20

Re: Ummm Marv...

Marv....... Northern California Lake Co.

>Scott,

That's not my shop, it's my living room.

Marv

Re: Skew Plane Question Answered

#21

Re: My Block Planes

Michael Brady

>Do you realize there are 32 guys out there doing without block planes because of you? How about letting a few go @ $5 ea.?