Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

OT give me that old time rock and roll

Posts

OT give me that old time rock and roll

#1

OT give me that old time rock and roll

Bill Houghton, Sebastopol, CA

>Having spent the last two days breaking up two sections of sidewalk and drilling four holes through the curb and retaining walls at the front of our property (ALL DAY on the holes - it's impossible to get any leverage on a rotary-hammer-type core drill when the body of the drill is about at your foot level, and running horizontally), I am more convinced than ever that concrete is my least favorite trade.

Yes, I know there's a lot of heavy grunting in woodworking too, but at least some of it's light and graceful.

Re: OT give me that old time rock and roll

#2

Re: OT give me that old time rock and roll

ThomD

>"it's impossible to get any leverage on a rotary-hammer-type core drill when the body of the drill is about at your foot level, and running horizontally"

Park your car next to it and use a jack against it.

Re: OT give me that old time rock and roll

#3

What are you attempting to do?

Parisian, VL

>

Re: OT give me that old time rock and roll

#4

Re: What are you attempting to do?

Bill Houghton, Sebastopol, CA

>Installing drain tile behind the house and behind the retaining wall at the sidewalk. We're at the bottom of a hill, and the gopher tunnels channel water very efficiently against the shallow foundation of the house, so we have a wet crawlspace. As to the retaining walls, our son put drain behind one side some years back, and, on that side, the sidewalk dries out a day or so after a storm; but on the other, the sidewalk stays wet for four-five days.

Cutting up the sidewalk permits me to run the drain lines under it and into the gutter.

Re: OT give me that old time rock and roll

#5

I feel your pain ! ( and your back this morning !

steve mackay

>

Re: OT give me that old time rock and roll

#6

Re: What are you attempting to do?

ThomD

>A simpler method might be to stand your weight on one foot and place a 2x4 against it vertically, then use that as leverage against a drill.

Re: OT give me that old time rock and roll

#7

Just put some carbide...

Scott Burr in Ben Lomond, CA

>Dentures in the gophers mouths and let them do the work.

Re: OT give me that old time rock and roll

#8

Just spent $658.50 for a dozen carbide

Parisian, VL

>rock drill bits at work on Thursday. About two months worth.

You got my attention.

Victor in Hot and Humid Houston (101 degrees today)

Re: OT give me that old time rock and roll

#9

Well, thank goodness, that's done

Bill Houghton, Sebastopol, CA

>My son came over today with his concrete mixer and we poured two sidewalk slabs. I came in a bit ago from the last troweling of the second one. Makes me look like a good sheetrocker, but it'll be OK once I mist it tomorrow am. I hope.

I'll be happy if I never have to do any concrete again, but I suspect some time I will...

Re: OT give me that old time rock and roll

#10

Well at least I hope...

Scott Burr in Ben Lomond, CA

>You or a loved one made hand (or other body part) prints in the concrete before it set! Congrats Bill the first rounds done...8^)