Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Making curlies is fun

Posts

Making curlies is fun

#1

Making curlies is fun

Hank Knight

>I spent the afternoon fitting the bottom in a hunt baord I'm building. I needed to cut a 1/4 X 1/4 groove and rabbit around three sides of the bottom, so I broke out my moving fillister and went to work. In the time it would have taken me to set up a dado blade on my table saw or a rabbit bit in my router table, I was done. As an added bonus, I have all these wonderful curlies that LOML insists I save for some future, but as yet undetermined, project.

Curlies

Re: Making curlies is fun

#2

Nice

Bill Houghton, Sebastopol, CA

>Let's admit it - half of hand tool woodworking is the fun factor...

Re: Making curlies is fun

#3

Just the curlies are impresive !

steve mackay

>

Re: Making curlies is fun

#4

Those be some fine curlies.

Parisian, VL

>LOML insists that I save all my shavings as fire starters. Think I've got enough to start fires thru 2015, assuming we have some cool weather to enjoy a fire.

Victor - in Hot and Humid Houston

Re: Making curlies is fun

#5

Yes it is!

Scott Burr in Ben Lomond, CA

>Nice shavings Hank! Be sure to post some pics of the completed hunt board.

Re: Making curlies is fun

#6

Re: Yes it is!

Hank Knight

>Scott,

I'm the slowest ever at completing projects. I started this Hunt Board before Christmas and I'm just now getting back to it. I may die of old age before I finish; but I did get the bottom in this weekend. Here's a photo:

Bottom In

Hank

Re: Making curlies is fun

#7

Re: Yes it is!

Todd O. Cronkhite Maine Native, Presently Away

>Glad to see that things have settled down to the point where the hunt board can receive attention again Hank. :~) It sure is looking nice!!

The hardest part about making curlies is STOPPING!

What's the story with that Mad River Canoe? New Hobby?

Dying is completely UNAUTHORIZED!!, and we'll have none of that here Mister Man!

T.O.

Re: Making curlies is fun

#8

Re: Yes it is!

Hank Knight

>Yo! Todd O,

How are you? Well I trust.

The Mad River canoe belongs to my daughter. It was a christmas gift when she was 12. We paddled most of the South Carolina black water rivers in it over then next 7 or 8 years. Great fun! Alas, she lives in a Co-op in D.C. and has no room for it; so it continues to live in my shop.

Hank

Re: Making curlies is fun

#9

Look greak Hank!

Scott Burr in Ben Lomond, CA

>I just might tie you as the slowest WW, no worries, at least we can correct our mistakes!

Look to me like it will have 3 drawers, am I correct?

Also can't really see the detail on the sides of it, is it a double bead?

As usual I'm full of questions...

Re: Making curlies is fun

#10

Re: Look greak Hank!

Hank Knight

>Hi Scott,

Thanks to you and all for the compliments. So far, so good. The piece is the Garrett Hack piece that was featured in FWW last year. It has some interesting construction details. The sides and back are three parallel planks separated by beads. The top and the bottom ones are glued into the legs (mortise and tenon). The middle one has a stub tenon and floats for movement. They are kept in alignment with full length splines. As you observed, it has (or will have, hopefully) three drawers and two cabinets, one on either end. Here's a photo from the FWW web site. I plan to finish mine differently. This is the first time I've ever built anything from someone else's plan, but I liked the design so I thought I'd give it a try. I'll remember to post progress pictures as I go along. They may be a while coming, unless my day job calms down. ;~)

Photobucket

Hank

Re: Making curlies is fun

#11

Beautiful work, and comment on fillisters

Wiley Horne -- So. Calif.

>Hank,

That's a very handsome hunt board. Is it your design, or are you following a historic example? Please follow up with photos as you go.

I remember your excellent find of that moving filletster. Did you do anything to it by way of fettling other than sharpening the cutters? It didn't register at the time, but now I see that the fence is notched, so the blade can be removed for sharpening without moving the fence out of the way (and losing the setting). That's a good idea, and I wonder why that modification is not seen more often on the old planes that were actually used to make a living.

Wiley

Re: Making curlies is fun

#12

Nice!

Scott Burr in Ben Lomond, CA

>Looks like it will be a fun and rewarding project. Yes, please keep us posted on the progress.

Re: Making curlies is fun

#13

Re: Beautiful work, and comment on fillisters

Hank Knight

>Thanks for the compliment, Wiley. I wish I could claim credit for the hunt board design, but it's Garrett Hacks' design. It's a fun project, though.

I flattened and sharpened the blade on the moving fillester and sharpened the nicker. Then I discovered that a section of the boxing between the nicker and the blade was loose. In use, pressure on the nicker pushed the boxing to the rear, jamming the throat and providing no support for the nicker. That probably explains why the plane was in such good condition: it was non functional. I was able to wiggle the loose section of boxing out and reglue it with some hide glue. Now it works like a charm. Otherwise I did nothing to the plane.

Hank

Re: Making curlies is fun

#14

Repost Pics

Hank Knight

>I screwed up and moved the photos in my Photobucket Album without realizing the move would break the links for posted pictures, so I'm reposting them. An Edit Feature on this Board would be nice for this kind of thing.

Curlies

Re: Making curlies is fun

#15

Picture Repost

Hank Knight

>Here's a second repost to repair a broken photo link.

Bottom In

Re: Making curlies is fun

#16

Thanks Hank!

Scott Burr in Ben Lomond, CA

>

Re: Making curlies is fun

#17

Re: Repost Pics

Dan Donaldson

>This particular software does not support user editing, but if you have something that needs fixing, let me know and I can fix it for you.

Ellis has thought about changing software to add editing and other stuff, but had not found the software with the features he needs or the money to get it changed. Now, if anyone has a few thousand dollars laying around that they don't need....... ;-)

Re: Making curlies is fun

#18

Re: Repost Pics

Hank Knight

>Thanks, Dan. I'll remember that next time I need to change something.

Hank