Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

My Bench

Posts

My Bench

#1

Corey Megal

My Bench

Corey Megal

>I completed this a few months ago. This is based on the Schwartz book, and I varied very little bit from the plan. I used Hard Maple because I was able to get it at a deal, and I have a very hard time finding Southern Yellow Pine in Milwaukee. I'm sure I can get it somewhere, but I can't go to my big box store and pick it up in the form of 2 by material.

Building the bench was a bit challenging, the hardest part for me was gluing up the top. I started with 5 sections, then glued those sections together one or two joints at a time. The hard part was that the subsections needed to be jointed after gluing. Jointing to 4 inch surfaces to meet at nicely is a bit of a challenge.

The other challenging aspect is the weight, after getting the top together, i couldn't even think about moving it around by myself, even with help it was a bit scary.

Do I like the bench? Absolutely. I haven't put it through all the paces yet, but it is a great bench.

Take care,

Corey


img

Re: My Bench

#2

Looks great ! . . .

steve mackay

>Two vices, stout and plenty of dogs. And, still, the faithfull Jorgy in evidence. Can't live without 'em . . . . can't have enough ! And that maple sure is good look'n ! Bet its solid as a granit surface plate.

Re: My Bench

#3

Re: Very, very nice

Dave Mount, no tulips yet. . .

>

Re: My Bench

#4

Corey Megal

Thanks! *LINK*

Corey Megal

>Thanks, Steve. As far as the jorgy clamps, one of the cool things about the bench is that you can throw a clamp on it anywhere. It is pretty granite like. It's given me a desire for a Lie-Nielsen jointer, though. My older Stanley just isn't up to my standards, and I know I could get the top flatter....

Corey


More Pictures on Flickr

Re: My Bench

#5

Great bench, nice shop, thanks for sharing.

Pam Niedermayer, Austin, TX

>

Re: My Bench

#6

Corey Megal

Thanks, some day I mght actually have drywall

Corey Megal

>

Re: My Bench

#7

Drywall is overrated in a shop. :)

Pam Niedermayer, Austin, TX

>

Re: My Bench

#8

Pam is right...

Stephen Shepherd in the State of Deseret

>The exposed posts (2x4) have a good look and some short boards and instant shelves, the block doesn't look bad, you could skin it with thin wood, or just whitewash it, then add hundreds of small shelves.

Nice Bench, does it float?

Stephen

Re: My Bench

#9

More pictures please!

wilbur

>It looks like you built a Roubo with a quick release vise at the right side of the board. Do you have pictures of the other end? How do you find the workholding capabilities of your bench?

Re: My Bench

#10

How do you like the..............

richard jones

>holdfasts? Those look like the TFWW ones, bought a pair myself, wonderful, simple device, don't know how I got along without it for so long...........

Good looking bench, et al..........

Rich

Re: My Bench

#11

Real nice Bench!

Stuart Hough

>i'm soon to start ny own. i'm planning on a Holzappfel like Chris's.

Re: My Bench

#12

Corey Megal

More pictures soon.... *LINK*

Corey Megal

>I'm out of town for a few days, but when I get back, I can post a few more. I wanted some way to hold work between dogs, so I decided to put the quick release vice I already had on the end. So far, I have no complaints, I tried to keep the dog holes as close to the front as I could. After reading about the Hotzaplfel, I thought it was reasonable to go ahead and add the vice in that position. I did have to offset the vice dog a bit to line up with the holes, so that may turn out to be a problem after years and years of use, but I doubt it. I'll post asome pics of what I'm talking about.

Corey


flickr pics

Re: My Bench

#13

Corey Megal

Does it float....

Corey Megal

>Stephen, I left a little room for the top to expand and contract front to back, but I'm not really concerned about it. If the base racks a bit, I don't think I'll care. Time will tell. I can always take the top off and correct the situation if I need to.

As far as the drywall, I'll need it to cover all the electrical work, plus I like the look. I'm a hobbyist so my shop is a work in progress (like most I guess.)

Thanks for the comments.

Corey

Re: My Bench

#14

Corey Megal

Re: How do you like the..............

Corey Megal

>Thos are the one's. I feel the same way as you do, wonderful, simple, and they work well.

thanks,

Corey

Re: My Bench

#15

Very nice Corey!

Scott Burr in Ben Lomond, CA

>Well that's a stout looking bench! I too would like to see more of it.

Is that a leather pad inside the leg vise? Also it appears the leg mortice is protruding above the top surface of the bench. Is there a reason for that?

Re: My Bench

#16

Corey Megal

Re: Very nice Corey!

Corey Megal

>Thanks, Scott, I'm still working on the pictures. That's no leg mortise, it's a planing stop, 2" x 2" friction fit, I can raise and lower it with ease to accommodate different thicknesses of wood. The leg mortises are stopped and pegged. Works pretty slick actually, I'll post more pics soon ( I hope).

Corey

Re: My Bench

#17

Thanks Corey!

Scott Burr in Ben Lomond, CA

>I thought it might bench stop. The way it's pictured it seems like it was a the top of a leg. It just looked a bit strange from your pics.

I still wanna see more! When ever you get a chance.