Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

"Driving Range"-Practice Project, pics

Posts

"Driving Range"-Practice Project, pics

#1

"Driving Range"-Practice Project, pics

Jim Shaver Oakville, Ont.

>Hi All

I have been working a project to practice some of my long quiet hand skills. I was inspired to attempt this project by the Hand Sawing class I took with Chris Schwarz in March.

My recent copy of Woodworking Magazine arrived about three or four weeks ago. The cover project of the Tabouret table gave me the inspiration to make this project to revive my skills, like going to the driving range prior to playing a round of golf.

While some power was used in dimensioning my stock, all the joinery was accomplished by hand.

I morticed out by hand, using quarter sawn white oak adds a little to the effort, my chisels are made Imai.

Photobucket

The top of the legs are held together with dove tailed top stretchers.

Photobucket

Photobucket

Photobucket

The corbel stretchers have a taper fit to the side of the legs, that was a bit of a challenge. All the saw cuts were established using chamfered shoulders to register the cut line ( 1st class saw cuts). I still need to cut out the profile for the corbels.

Photobucket

Photobucket

Photobucket

Photobucket

Dry Fit to check for assembly squareness and fit

Photobucket

Some final refinement of the fitting has me at a stage where I can now half lap the stretchers and corbels and get on with the final assembly then finish.

A simple project, but a fun tune up for what I have planned next in the shop. It's got some flaws for sure, but I feel like I'm ready for the course now.

:-)

Take care,

Jim

Re: "Driving Range"-Practice Project, pics

#2

Re: "Driving Range"-Practice Project, pics

Bob Lang

>Nice work Jim. Not an attempt to hijack the thread, but I always find it interesting how a lot of woodworkers are reluctant to practice or warm up before taking on something challenging. A small project like this or even a practice joint or two can make a big difference.

Bob Lang

Re: "Driving Range"-Practice Project, pics

#3

Re: "Driving Range"-Practice Project, pics

Jim Shaver Oakville, Ont.

>Hi Bob,

Thanks. I thought to try this approach each spring as my shop is closed though the winter...may hands and technique are a bit stale. I know that my dt's are not tight here and that my M&T will need some work yet, but I have a sense for how I am right now and where to refine a bit. Chris's class gave me the energy to work my saw skills too.

I was hpoing to start a discussion on this topic about practice with this post, I have graduated from my Martian DT's but I wonder if Stickley would approve of the leg detail I borrowed from the G&G influence.

:-)

Take care,

Jim

Re: "Driving Range"-Practice Project, pics

#4

Jack Guzman from Maine

OT about the leg vise

Jack Guzman from Maine

>Hi Jim,

I remember when you built that bench.I noticed that you used your leg vise alot on this project.I wonder,do you find yourself using the tail vise alot as well? I plan on doing some modifications to my bench's holding devises in the future with some wooden screws I got from Howard Card. I've been debating between the leg vise and a face vise for the front,and still debating putting in a tail vise in place of the almost useless end vise that I have now.---Jack

Re: "Driving Range"-Practice Project, pics

#5

Re: "Driving Range"-Practice Project, pics

John in Kerrville

>Jim, what is really embarrassing is cutting one set of dts opposite the other on opposite ends of the same board. But, that is what practice is for.

Question: anyone else ever cut dovetails with a hacksaw? I started out that way and until I read Cecil Pearce's 2nd book, figured I was the only one. It was all I could afford at the time, and my handsaw certainly would not have worked. I still do it that way, but my dts are usually of the utility variety and are done for speed, not looks.

Keep practicing, your skills will return to form soon.

John (in Kerrville where heat, not cold, keeps me out of the shop)

Re: "Driving Range"-Practice Project, pics

#6

Hijack... re: Kerrville

Parisian, VL

>Hi John,

We drove up hwy 16 out of San Antonio yesterday morning going through Kerrville on our way to Fredricksburg for lunch and shopping before heading back to Houston. We love your part of the country. Hope to catch up with you there someday.

Victor - in Pearland

Re: "Driving Range"-Practice Project, pics

#7

Jesper, Denmark

Re:OT about the square....

Jesper, Denmark

>Hi Jim,

Nice as usual.

I noticed the small sliding square in picture #5. i have seen Sam Maloof using this, which seems a very handy measuring tool, but I have not found a supplier anywhere yet.

Where did ya get it?

Re: "Driving Range"-Practice Project, pics

#8

Jack Guzman from Maine

not Jim but... *LINK*

Jack Guzman from Maine

>Jesper,

I just recently bought one of those from Lee Valley and I have come to depend on it.That square does alot of things no other tool can do.---Jack Jim,sorry about the hijack


Double Square

Re: "Driving Range"-Practice Project, pics

#9

Right On

Jim Shaver Oakville, Ont.

>Hi Jack..

No problem,

I have two of those combination little squares, I got my first one from a Secret Santa, I boutthe second one when I found out I couldn't live with out just one...it's amazing for doing layouts, I love them!

Take care,

Jim

Re: "Driving Range"-Practice Project, pics

#10

Re: OT about the leg vise

Jim Shaver Oakville, Ont.

>Hi Jack,

I do use the leg vise a lot, it's got massive holding power. When I need wider support I use the edge of the leg vise and a clamp to the bench rail, it's simple. The shoulder vise does get used a lot too, I's say I use them differently, but about 60-40 for the shoulder vise.

Take care,

Jim

Re: "Driving Range"-Practice Project, pics

#11

Re: Hijack... re: Kerrville

John in Kerrville

>Hey Victor. My wife's sister lives in Pearland and we lived in Alvin for about 15 years. My daughter graduated from Alvin HS. This was back when Alvin had a larger population than Pearland and the land between Pearland and Friendswood was mostly farm land.

I am always here unless I am not. I really do not have much of a shop anymore. I need to sell my power tools except for the ones that I need to repair people's homes. The Unisaw definitely needs to go. Storage for it is the pits.

john

Re: "Driving Range"-Practice Project, pics

#12

Back in the saddle...

Scott Burr in Ben Lomond CA

>Doesn't look to me like you got too rusty! It's going to be a nice looking table, be sure to post some pics when it's completed.

I have a couple of questions if you don't mind. What G&G book is that? Also what's the green masking tape for?

Thanks, Scott

Re: "Driving Range"-Practice Project, pics

#13

Answers

Jim Shaver Oakville, Ont.

>Hi Scott,

Thanks... the G&G book is Darrell Peart's book, it's excellent. He shows some G&G details in the book and how to make them.

The green tape was used to help me keep things organized, marking the face I wanted to mortice. I have used the tape idea for a long time, it never fails me, and it's Really Obvious when I see it.

I'll post some pictures as I work it through...nice to be back in teh shop making things.

Take care,

Jim