Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Markings on Stanley chisel

Posts

Markings on Stanley chisel

#1

Markings on Stanley chisel

richard jones

>Friend gave me a Stanley socket chisel, sans handle. 5 5/8" long, 1/2" wide, marked Stanley, Made in USA, all on the socket, but has a D in between the Stanley and the Made in USA stamp. No markings on the blade. Is this the Defiance? Any way to date them?

Thanks.

Rich

Re: Markings on Stanley chisel

#2

Re: Markings on Stanley chisel

Ray Binnicker

>I believe the "D" was to indicate a defect of some sort. The defect may have only been a blemish or a very small nick in the wood.

Ray Binnicker

Re: Markings on Stanley chisel

#3

Re: Markings on Stanley chisel

Michael Brady

>Wrong-O. The D indicates a Stanley Defiance tool...just an alternative branding of the 750 chisel. The handles on Defiance chisels were finished clear coat over hickory wood, rather than the deep oxblood finish on the 750's.

Re: Markings on Stanley chisel

#4

Re: Markings on Stanley chisel

Ray Binnicker

>I may be wrong, but the Defiance chisels I've seen were stamped "Defiance" and were stamped with the number 1221 - 1251. Richard says his chisel is stamped "Stanley" with the letter "D" between "Stanley" and "Made in USA".

Somebody help us out here.

Ray Binnicker

Re: Markings on Stanley chisel

#5

Re: Markings on Stanley chisel

Hank Knight in SC

>I have some Stanley chisels that are stamped "750" on the socket with clear coat hickory handles. I have some Stanley "D" chisels that have the dark red lacquer handles. Consequently, I don't think Michael's description is correct for Stanley "D" chisels. I always understood the the "D" stood for Stanley's "Defiance" line which were substantially the same as the top of the line 750s, but not finished quite as well, and that Stanley had some other method for designating "seconds" such as stamping them as "imperfect" or some such. I don't know where I got this impression, so it could well be wrong. FWIW, I could never tell the difference between the finish of my "D" chisels and the ones stamped "750." I can't tell any difference in the steel. None of my 750s or my "D"s have steel that compares with Witherbys of the same era or even Stanley Everlastings of the era.

My $.02

Hank

Re: Markings on Stanley chisel

#6

My thanks to all............

richard jones

>