Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

My mind got to wandering today.

Posts

My mind got to wandering today.

#1

My mind got to wandering today.

Parisian, VL

>So I thinks to meself: Self, I know what started my journey down the slippery slope (as described in my response to Dave Miller's post below) but how 'bout those other guys and gals?

So, How did you get your start down the slippery slope? What was that first hand tool and when and where did you get it. Do you still have it?

Victor - in beautiful Houston.

Re: My mind got to wandering today.

#2

Re: My mind got to wandering today.

steve mackay

>5 1/4 found in a Fort Bliss dumpster. Had never used a hand plane before. Trying to find out if it was worth keeping and/or useing, I stumbled onto this thing called WoodCentral. Talk about " sucked into the vortex ".

Re: My mind got to wandering today.

#3

My cat made me do it.

Neal in San Jose

>My old tom cat used to like to come out into the garage shop when I was working out there, and hop up on either my bench or tablesaw to "supervise". He'd get a very concerned look on his face when I turned on the dust collector, and he'd disappear when I turned on whatever power tool the dust collector was on for. I liked having him around, so I tried to minimize the power tool usage and eventually got to where I prefer to do things by hand if I can. I eventually put a blanket on the table saw for him to curl up on and keep him off the bench so I could actually get something done, and months would go by without turning the tablesaw on. I still miss that little guy. The new housecat won't have anything to do with the shop, so I've reverted to some of my "Normite" ways; even upgraded to a SawStop, but I still do the lion's share of my woodworking with hand tools. I have no idea what my first hand tool was. Probably a hammer or chisel waaaay back when.

Re: My mind got to wandering today.

#4

Re: My cat made me do it.

Bruce Mack

>I too have a shop cat who jumps on the bench when I work, checking the piece for twist and cupping, and supervising my honing of chisels and irons. For the same reason, when I can, I reach for the hand tool in preference to power.....

Re: My mind got to wandering today.

#5

Re: My mind got to wandering today.

Pam Niedermayer - Austin, TX

>I needed a bookshelf and my Dad was a hopeless carpenter. I was 11.

Pam

Re: My mind got to wandering today.

#6

Re: My mind got to wandering today.

Derek Cohen (in Perth, Australia)

>I recall writing something about this back in the Badger Pond days.

Probably about 14 or so years ago ... I was installing doors in a newly-built house of ours. At that time I was pretty much a dedicated Normite (but my power tools, outside of the tablesaw and obligatory power routers - take note of the plural "s" - was still fairly meager - no power jointer or planer). I had a variety of power sanders, even a Festo (that was before it became Festools). I did love my handheld power plane, a Makita, and used this to great effect in many areas. When switched on it screamed like a banshee in heat (or pain or both), and the neighbours refused to speak to me (anyway I was deaf so it mattered not), but it made me feel like Tim Taylor (more power!!).

So there I was trimming the end of the door to fit with my beloved Makita... and it just was not cutting well. Damn blades were blunt. And it was too late in the day (I said my neighbours loved me) to get to the local supplier. Then I remembered the Stanley #3 I had tucked away on a shelf. It had been my late father-in-law's. Looking back, I do not recall using it much, if at all, before that day.

Somehow I managed to set the blade correctly and, even more of a miracle, the blade was sharp enough. I passed it over the wood of the door, and it went "Schick..". A shaving came away cleanly and magically. Damn! Let's do it again ... and again...

I wuz hooked, utterly and totally hooked.

The Makita was never again used. It lay on a shelf for several years. Eventually I gave it away.

The #3 .. I am mortified to say that I stuffed it up. I recall wanting to tune it up and that one of the recommendations was to clean up the mouth with a file. Not understanding this correctly, I filed a fine chamfer on the outside (!) of the mouth, thereby effectively opening the mouth up. It was now useless for fine shavings. I eventually turned it into a scrub plane so that it was in use. Expensive lesson (in emotion, not in money). All these handtool additions to the workshop are just my way of trying to fill a void left by the #3 ... or so I tell my shrink.

Regards from Perth

Derek

Re: My mind got to wandering today.

#7

my trip to College of the Redwoods

Bill Tindall, E.TN

>I had been doing woodworking, isolated from interaction with others in this remote part of the world, for many years. I cut parts on the table saw and PUT them together.

I received a warm welcome at the college one afternoon and as I chatted with each student at their respective bench I was struck by the fact that they rough cut parts and FIT them together by removing tiny increments of wood with a plane, chisel or spoke shave. It was an epiphany. I returned home committed to learning how to use these tools for fitting. Learning to sharpen enabled me to take advantage of tools I had never been able to successfully use before.

I wouldn't call my experience a slippery slope. It was more like being freed to fly.

For me these hand tools fill the space between power tools and sand paper for removing wood and my joinery is the better for learning to use hand tools.

Re: My mind got to wandering today.

#8

Re: My mind got to wandering today.

Glenn Madsen, SF Bay Area

>I got to the point where I just didn't want the noise any more. There are too many loud parts of my life, and my hobbies shouldn't be one of those.

Handsaws, planes, rasps, scrapers, chisels, sand paper and the like are all part of the quiet side. I turn on the big, expensive machines when I have to. I pull down one of the hand planes when I want I want to.

The problem is when the project really demands the loud stuff, I tend to put off the project.

Re: My mind got to wandering today.

#9

Re: My mind got to wandering today.

David Miller from Iowa

>I sort of backed into it. When I was a kid I was conscripted into working into my Dad�s small town hardware store. I was too young to �wait on the trade� so I cleaned, glazed windows, and eventually learned to sharpen scissors, knives and plane cutters. Most of the carpenters sharpened their own, but there were a few who liked the way I did it (I think they liked to regale me with tales of the old days � I was the only one who would listen). When I was in 8th grade, in �manual training� they had about 10 bedrock 605 � planes in the shop (I had no idea they were special) and I got extra credit for sharpening them all � they hadn�t been honed in decades it seemed and the fresh-out-of-college teacher had no clue about how to use a plane.

Fast forward to my first job, a house full of toddlers and absolutely no cash for discretionary spending. I really needed some projects to help me wind down in the evenings. There was a lumber mill within walking distance so I could get air dried lumber for practically nothing (actually nothing if I went to the burn pile). My brother gave me my first plane (Bedrock 604), and I picked up a brace, some rusty auger bits, a drawknife and a handsaw at a flea market. Whoosh, down the slope.

PS � I have posted this before, but my Junior High burned (prior to my starting the slippery slope). The school was a total loss � only the shop was intact but had water damage and no roof. They sold a few of the power tools for parts and threw out the rest. I remember going with my Dad to see if there was anything to scrounge and we looked into a dumpster full of hand tools, including all the Bedrock planes and then just passed them up because they had surface rust. (D�oh). Instead I took home an old cast iron horse tether weight that was used as a doorstop. Still have that.


img

Re: My mind got to wandering today.

#11

Child of the 60's

Bill Houghton, Sebastopol, CA

>Though we were going to be back to the land folks, didn't get far out of town, but, like a lot of us in that era, intrigued by old ways of doing.

Re: My mind got to wandering today.

#12

Re: video tapes

ThomD

>There are basically two paths: You need to build something and you just buy the stuff you need to build successive projects, or you see the tools as an end in themselves and explore that as rapidly or slowly as you like. I imagine most people do a bit of both. I was pretty project oriented, but I also fairly rapidly got on the Krenov, then Japanese tool bandwagon, sorta the same thing at the time since he used dozukis and japanese chisels, diverging with his own planes. One thing about Krenov was that he used both power and hand tools, so there wasn't a separate path of being one or the other. I didn't have much money 30 years ago so every plane blade could be a big excitement in it's own way. I do remeber buying an Inca over and under planer so that I could cheaply mill the wood I needed to make a bench. That sounded like a good compromise between spending a few thou on a premade bench.

Probably the most expensive tools I bought early on were my Ouchii chisels from Materpice tools in NH. The best tools I bought were videotapes (not many seminars around here). You can pretty quickly drill in the techniques on a tape. It's far more important to thave skills than any specific tools. We live in a consumer age, and I am just as obssessed as most. A lot of the approach to tools is just another justification for something to buy, without skills and stuff to build it gets to be just more clutter.

Re: My mind got to wandering today.

#13

Sir Roy made me do it.

Roy Anderson

>I was looking for a hobby and was tinkering with woodworking with no idea which direction I wanted to go in when I stumbled upon Roy Underhill's show on PBS. I immediately knew that's what I wanted to do.

Re: My mind got to wandering today.

#14

dust allergies

Paul M.

>I started working with power tools like any other person who watched Norm on TV. ;-)

I found out quickly that every time I turned on a power tool, I spent the next 2 days hacking and coughing. If I tried working 2-days in a row, the fevers kicked in as well which lasted 3 days or more. It doesn't matter what variety of wood is being butchered. All of them produce dust, and it's the dust that makes me sick.

Hand tools produce shavings instead of dust, and I've not had problems since. If I do a small amount of sanding pre-finishing, I make sure to put on a good dust mask before the operation. But somehow putting on the full "Tommy" suit (i.e. deaf, dumb and blind set of hearing protection, dust mask, and eye shield) to work wood with power tools makes me really hate doing that.

By using just eye protection and using hand tools, it's a much more fun hobby.

Re: My mind got to wandering today.

#15

I was a power tool junkie...

Scott Burr in Ben Lomond CA

>That could not afford or had the room for a jointer of a planer. A friend of mine knew I was into wood working and gave me 2 handplanes a No. 5 sized Shelton and a Stanley 3C. After reading RJ's plane tuning and a lot of questions on Badger Pond, I was hooked.

Re: My mind got to wandering today.

#16

Re: I was a power tool junkie...

Todd McClure------WebKitFormBoundaryT+f8pEFax7tOQL

>My father gave me all of his old FWW... I was drawn to the many articles about hand tools, and thought it would be a "cheaper" way to make some things for the house. The first time I used a plane (a 60's stanley #4) I was hooked. The lack of noise, dust and vibrations was nice, but it was really the shavings magically rising from the wood that entranced me.