Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Not ready to give up power tools but...

Posts

Not ready to give up power tools but...

#1

Not ready to give up power tools but...

David

>I can safely state that until this afternoon I'd never worked with a truly sharp chisel or plane. That all changed after finally buying a set of water stones and re-educating myself in the art of sharpening. I've had an el cheapo combo sharpening stone that has been kicking around so long that it was used with both oil and water since no one could remember which is was. Didn't seem to matter since it put a serviceable edge on whatever I was using.

Got to admit that I was feeling mighty proud of myself to see the mirrored micro bevel appear on the cutting edge but that didn't compare to the first cuts, which didn't quite bring tears to my eyes, but certainly opened them wide.

I've been working more and more with hand tools, and while I'm not ready to go off the grid, the feeling of shaving paper thin slices with a chisel or plane and getting things to fit perfectly, is really amazing.

I'm sure you guys already know this but I just had to tell someone :) My

Re: Not ready to give up power tools but...

#2

Stories like that are inspiring...

Denis Ch�nard, Orl�ans, Ont.

>I always appreciate when someone finds out that hand tools are more than a throwback to old days, and are still relevant...

Have fun going down the slippery slope! :-D

DC

Re: Not ready to give up power tools but...

#3

Re: Stories like that are inspiring...

Todd O. Cronkhite Maine Native, Presently Away

>Isn't Enlightenment wonderful!:~)

What size plane did you use?

T.O.

Re: Not ready to give up power tools but...

#4

Re: I remember that feeling. . .

Dave Mount, 50 mph wind and 15" snow forecast

>For me, that was before the internet was an outlet for your excitement. Instead, I drove over to a friend/neighbor's house (neighbor as in 3/4 mile away where we live) with a piece of cherry and a chisel to show him how I could slice away end grain with ease. A complete epiphany for me -- he pretty much thought I was nuts (a perceptive guy).

It's fun, enjoy the ride. . .

Dave

Re: Not ready to give up power tools but...

#5

Re: Stories like that are inspiring...

David

>The first plane to do its stuff was a Miller Falls no.56. This one has been my tweek everything plane for years. I appropriated it and a no. 90 from my father.

The real fun one to play with was an Anant A70 (bullnose rabbet). I just got it out of Highland Woodworking's clearance bin for $25. Still brand new, factory wrapped but with an ugly box. Used it to "adjust" tenons for a workbench I'm building for my son. The real test of tool and woodworker will come this morning when I break out a Record #7 to flatten the top that has been drying overnight.

DGW

Re: Not ready to give up power tools but...

#6

Sweet!

Scott Burr in Ben Lomond CA

>I realy like stories like this. Did you get jiggy wit it, or go freestyle?

Re: Not ready to give up power tools but...

#7

Re: Sweet!

David

>I picked up a jig but played back and forth between free hand and the jig. Figured if I'm out in the woods some day with no jig in sight, might still need to sharpen something freehand :)

Re: Not ready to give up power tools but...

#8

Moses Yoder

Re: Not ready to give up power tools but...

Moses Yoder

>I still sharpen my plane irons with a jig, just because I like the ease with which I can get the blade just the way I want it. I am not sure if you have read Charlesworth's suggestions on the use of a ruler for sharpening but I have been experimenting some with that and finding it useful. Especially on old stanley irons. If you don't have newer Hock or LV or LN irons, buying one of those will move you right up to the next level of sharp. It's difficult to describe. I am working with hickory right now, and there is a lot of variation in the wood. Some planes easily and other boards are near to impossible. I have found that by putting pressure down only on the pull stroke I get a better cutting action on the steel; it seems to put the burr on a little faster and consistently. (Something I picked up from David Sauer; I think I remember the name correctly). I leave a light pressure on as the blade moves forward, which creates a suction behind the iron so the water on top of the stone is pulled along behind the iron. Then pressure down on the pull stroke. A few strokes with pressure down just on the corners to relieve the edges just enough that they won't leave plane tracks. I hone the back on a 4000 grit stone after polishing the bevel, to remove the burr, then a slight honing of the back with the ruler on the 8000 grit stone. I can hear that hickory breathe a sigh of relief as I am putting the iron back into the plane.

Re: Not ready to give up power tools but...

#9

Re: Not ready to give up power tools but...

David

>I haven't tried using a ruler but will. As you can probably tell, I'm still learning my way around. My next task is to square the iron in my block plane and on a couple of bench chisels that are approaching skew proportions.

My planes are neither fancy nor expensive (50's vintage Miller Falls 56 and 90, newer Record #7 ($88 on Ebay), and an Anant bullnose rabbet) so I do cautiously experiment. Same when it comes to chisels. Got a pile of cheap bench chisels for experimenting, a few better ones that I fuss over.

Sort of related, I was starting to sort and machine some spalted sugar maple yesterday. I've got real problems ripping 16" wide boards down to 12" so they can fit into my planer (I have a 16" jointer but that's another story). With all this sharpening going on, maybe I'll actually do the thickness planing by hand!