Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Nice butt! Cheap, too! *LINK*

Posts

Re: Nice butt! Cheap, too! *LINK*

#26

Re: Not yet but I will...

Stephen Shepherd in the State of Deseret

>I only get leather wet to shape it, when I am hammering stitches I do it dry.

The diamond shape awl makes holes that close up after they are hammered and make for a tighter work. The glover needles are good for thin leather.

I also make the work wider, mark the stitch holes, awl and sew and hammer then trim the work down to the stitches. I use a marking wheel but because it is 10 PPI, I skip one or two for wider stitches. I sold a nice 5 PPI wheel with an adjustable fence, sweet tool, but it went to a good home.

Here is my cabinet hammer it has a straight peen like a cobblers hammer and I love its look and feel, one fine hammer.

Stephen


img

Re: Nice butt! Cheap, too! *LINK*

#27

Re: Oh, here's a pic...

Stephen Shepherd in the State of Deseret

>Here are a couple of things I made that I carry in my vest pocket. The lower is an ivory toothpick and sheath. The upper one is my Personal Analogue Assistant, three old piano key ivory pages, pencil sleeve and dust jacket.

The toothpick is almost 1 3/4" long.

Stephen


img

Re: Nice butt! Cheap, too! *LINK*

#28

Re: Yes, but haven't used the diamond tip...

Robin Corell in Atascadero, CA

>I get nicer looking results when I make the groove for the stiches on the back side after punching the holes. Of cource this is only possible if you glue your parts together before stitching. it Awls come in diferent sizes and it took me a couple of tries to find one to my liking. Actualy I went into the back room a Siegals and was allowed to look through the boxes of awl tips till I found the one I liked. If you ever do that be very careful it is one tempting candy store.

Robin

Re: Nice butt! Cheap, too! *LINK*

#29

OMG, that ivory is goreous! Nice toothpick!

Alan DuBoff

>Stephen,

I love ivory, even though it's not politically correct. I've had my eye on an old shamisen that has a solid ivory bachi, most all were ivory in the old days. My wife's grandmother was amazed that I could kinda play the shamisen, or that I knew about it.

Actually, my family has a home that is more than 150 years old, and the home itself is worthy of a full restoration. Wood fired bathtub, indoor outhouse, all the doors/walls open to a small garden on the front side of the house...our Grandmother wouldn't live anywhere else, even until she was in her 90s...what a gal she was...staying at thier house was the first time to see someone wearing fundoshis, that's all our Grandfather wore his entire life...maybe that's what made him so successful???? (dressed for success!;-) Still not clear what the family will do with the house, they own quite a bit of land in Kagoshima (south Japan), but some of the kids have houses built around the old 150 year old home. Still worthy of being completely restored...

I have to tell 'ya, you have some of the coolest old stuff, I just love old stuff, as I'm sure you can tell...

Re: Nice butt! Cheap, too! *LINK*

#30

So your a butt man too...

Scott Burr in Ben Lomond CA

>Sorry couldn't resist... Thanks for the link, and the contents of the thread between Bob and yourself. Do you (or Bob for that matter) think it would be possible to use horse butt mounted on a hard substright instead of cast iron plates for the higher (finer) diamond grits or will they just imbed them self's in the leather?

Scott, going back to think of more warped ways to responce to this post. After all who doesn't like a piece of good cheap, ahhh you know...

Re: Nice butt! Cheap, too! *LINK*

#31

Chief Engineer Deseret City Fire Dept. #1

Stephen Shepherd in the State of Deseret

>Here is my Belt, cotton web with alum tanned ends, brass harness buckles, copy of mid nineteenth century original. The Buckle cover goes over the metal to keep it from getting hot during a confligration.

You should see my leather Fireman's Hat, all painted white (I am currently the chief). I also have a nice brass speaking trumpet, red tunic and leather fire buckets. Not to mention the battle rattle, hook and I need to make a longer ladder.

Stephen


img

Re: Nice butt! Cheap, too! *LINK*

#32

Re: Chief Engineer Deseret City Fire Dept. #1

Stephen Shepherd in the State of Deseret

>We encourage everyone to support the Volunteer Fire Department, business folks and residents alike. And most folks in town do, and to those that don't, we will eventually get to your fire.

Belt with cover over metal buckles.

Stephen


img

Re: Nice butt! Cheap, too! *LINK*

#33

A few more items

Stephen Shepherd in the State of Deseret

>I carry my modern fiduciary instruments in the black wallet. The other notebook is from the tails from the old piano keys. My coin purse is fashioned after a sailor's ditty bag. A couple of Spanish Milled Talers and a 'bit'.

I have some nice hair cell pigskin I am going to cover some wooden boxes and books.

Stephen


img

Re: Nice butt! Cheap, too! *LINK*

#34

This is just plain way kewl...

Alan DuBoff

>

Re: Nice butt! Cheap, too! *LINK*

#35

Re: Not yet but I will...

Alan DuBoff

>Stephen,

Somehow I missed this message before, just stumbled on it...I have 2 overstitch wheels, but unfortunately I'm a dolt, err...I mean galoot, and they're the same size. What happened was that I ran the wheel on some leather and counted the points, similar to how a saw is counted, but what I didn't realize is that overstitch wheels are marked in tpi, vs. ppi...:-/ I thought what I had was a number 6, and didn't know it was actually stamped on the shaft, which is 5. I still wasn't sure how I would do the leather at that point, and had bought a 4-in-1 punch, which I later learned wouldn't stamp this type of leather, and that it was preferred to punch with an awl. I took that back where I bought it at a local hobby/craft store.

Actually I didn't even hammer the stitching on the case I ended up making, but it wasn't without mistakes in the project that resulted in changes. Like everything, being able to overcome mistakes is part of the learning process.

This is my hammer.


img

Re: Nice butt! Cheap, too! *LINK*

#36

Re: Not yet but I will...

Alan DuBoff

>Stephen,

Somehow I missed this message before, just stumbled on it...I have 2 overstitch wheels, but unfortunately I'm a dolt, err...I mean galoot, and they're the same size. What happened was that I ran the wheel on some leather and counted the points, similar to how a saw is counted, but what I didn't realize is that overstitch wheels are marked in tpi, vs. ppi...:-/ I thought what I had was a number 6, and didn't know it was actually stamped on the shaft, which is 5. I still wasn't sure how I would do the leather at that point, and had bought a 4-in-1 punch, which I later learned wouldn't stamp this type of leather, and that it was preferred to punch with an awl. I took that back where I bought it at a local hobby/craft store.

Actually I didn't even hammer the stitching on the case I ended up making, but it wasn't without mistakes in the project that resulted in changes. Like everything, being able to overcome mistakes is part of the learning process.

This is my hammer.


img

Re: Nice butt! Cheap, too! *LINK*

#37

Hmmm...not sure how I got 2 posts...

Alan DuBoff

>