Re: Choosing
ThomD
>Pam, I have it easy, sorta, in that our "farm" where we spend summers at times, was owned by a great great uncle who gave it up to a lumber guy during the depression. By the time I was in the picture there were all these axes around, and I never really knew the reason. A few years back we had high water and we had to build up our shore back from undercutting. We were bringing in large sandstone blocks, and there was a marvelous deposit of river washed gravel such as one doesn't generally see on our beach. So I proceeded to dig that out before the boulders arrived. Anyway. I found several more bits, just like the ones in use around the place. I mentioned this to a friend who thought maybe folks were throwing the broken shafted axes into fires and the heads were percolating out onto the beach where the woodsmen might have collected, though it isn't really a summer occupation around here. Also that trick with the shafts would be real hard on the temper of the axes which seems real good. It is possible they simply washed up off the shore from boats, which means there are still hundreds out there maybe even on our shore...
Anyway, as to the sharpen ability of the bit. I have noticed two things in tool markets. The steel normally lasts a good bit longer than the geometry. If I find bits I like the look of, there is steel in there, and it has always been good. The other thing is that with axes, I see a lot of axes that are good quality and that I remember from catalogs in the 70s, there is old stuff to be sure, but people always need axes so sometimes one can find very decent stuff and good prices, that is basically new. Often I don't want these axe shapes, but quality wise they are fine.
A lot of axes I see with the exception of the basic woodsman models do not show a lot of use. When I find really old ones if there is something wrong with them it is often that they were used as wedges, which destroys these old heads made out of welded iron.