Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Unfinished planes

Posts

Unfinished planes

#1

Jim in Burlington Ont.

Unfinished planes

Jim in Burlington On

>So how many unfinished planes steel or wood do you have laying around. I have 6 stanleys.4 wooden ones. 3 Shepherd planes kits. 18 hollow and round blades. 6 blades that need tempering. We've had the coldest snowest winter in 30 years easily. I should have got something done. I think there needs to be a plane building retreat somewhere.

Re: Unfinished planes

#2

Darrell in Oakville

Re: Unfinished planes

Darrell in Oakville

>I've got maybe a couple dozen old wooden planes (dados, molders, rebates) that I have not done any rehab on yet, not even wiping off the grime. A big rusty old chisel that desperately needs attention. A partially completed smooth plane made of apple. And probably a few more that need work, but they're not on the top of the pile, so I don't know how many...

Jim, you should have titled this thread "Unfinished Plans" ;^)

Darrell

Wood Hoarder, Blade Sharpener, and Occasional Tool User

Re: Unfinished planes

#3

Untuned planes

David Miller from Iowa

>If you are talking about planes that need wiped off and tuned as opposed to remanufactured, I have about 30. I don't feel particularly concerned about it though, one weekend I'll get a wild hair and do some damage on them.


img

Re: Unfinished planes

#4

Re: Unfinished planes

"RJ" Whelan

>Jim ... when I retired from my corporate job (in '02) I took a serious look at my life in general and found that I had gotten into the position of being possessed by my possessions - nowhere was this more evident than the collection of planes (well over 100).

So .... remembering Thoreau's injunction to "simplify" I made two piles; one contained those tools I actually used (if only occasionally and the other (far larger) contained tools that I sometimes didn't even remember building or acquiring.

Some of the second pile went on various WW message boards and were sold - the majority were given away to friends and schools (most).

To answer your question - I don't have a single tool awaiting restoration. I do however need to spend a day sharpening chisels and irons - when I lived in So. Cal. this was my traditional way to spend January 1st; where I live now (while not as cold as your neck of the woods) the shop is just a tad cold for such sedentary activities.

All the best ... rj

Re: Unfinished planes

#6

2 Stanleys, 1 mutt & . . .

steve mackay

>a hybrid inlay the keeps giving me the stink-eye.

Re: Unfinished planes

#7

Re: Unfinished planes

Brad in Ottawa

>Funny you should mention the Shepherd plane, I recently put mine back on the bench to finish it. It is a 1" shoulder plane and it works really well. The downside? All the filing marks need to be patiently worked out. I made significant headway last weekend and maybe I might finish in a month, or two or more!

Other than that my planes are in great condition. Or maybe I'm not that picky?

Re: Unfinished planes

#8

Re: lazy days

Moses Yoder in White Pigeon, MI

>Why is it so easy to set in an easy chair daydreaming about all those wonderful tools. I think I get more done in the summer because the days are longer and I don't have to heat the shop. I have more time in the winter but a large portion of that time is spent reading. I am definitely past the aquisition stage though. This is a normal path and I feel pretty good about it. You have to get a lot of tools to find the ones that really become favorites. Then you get rid of the ones you no longer use. How many unfinished planes? Well, that is just a terribly uncouth question and I will have to resort to pleading the fifth. That's like asking a woman how old she is :) I did find a very nice #75 Yankee push drill about a month ago though that I just had to buy. The upside is it needs no refurbishing at all, which is the best tool to find ;) How many saws do you have that need sharpening?

Re: Unfinished planes

#9

Re: Unfinished planes

Todd O. Cronkhite Maine Native, Presently Away

>...when I retired from my corporate job (in '02) I took a serious look at my life in general and found that I had gotten into the position of being possessed by my possessions - nowhere was this more evident than the collection of planes (well over 100).

So .... remembering Thoreau's injunction to "simplify" I made two piles; one contained those tools I actually used (if only occasionally and the other (far larger) contained tools that I sometimes didn't even remember building or acquiring.

RJ, I'm right at that very point myself. I've been weeding out more of my book and magazine collec...er, accumulations lately and all unused and duplicate tools are next.

T.O.

Who just finished "Walden" yesterday.

Re: Unfinished planes

#10

Re: Unfinished planes - warning

Derek Cohen (in Perth, Australia)

>In my case I don't have a lot of unrestored planes. There are a few I am currently working on (excluding the fantasies in my head that I dream about making). Mostly I do these between projects. Since I live in Old Tool Hell I do not have the distractions of fleas to build a collection ... ah selection .. of duplicates.

One is the end stages of a #46. The rust has been removed, which took the last vestagers of nickel with it, and it either will remain waxed cast iron, or I will have it re-nickeled because it is otherwise in excellent condition and deserves better than it has at present.



The other, a Stanley #51/52, is also in process. I have got to the stage where I have re-built the mouth-frog section so that it works reliably, and now is time to re-jappan the whole deal. Then I will finish the accessories (machine the rough cast holedown).

Taking the first test cuts:



After this I have a Paul Hamler plough kit to complete. This one hasn't been on the shelf too long as it was a birthday present from my wife in January (made possible by the kind intervention of Rob Lee ... and not forgetting Paul Hamler of course).



I've just got to get to that St James Bay thumb/block plane. This one is more tricky than current models as it has an adjustable mouth, andd there is still a fair bit of machining to do before the infills can be shaped.



Here is Brian Buckner's handbuilt fixed-mouth version. I can dream it resembles this!



Another is the plan for my "ultimate Jack", which will be a woodie using this 8mm thick (!) 2" wide D2 blade. This plane will fear no wood!



Regards from Perth

Derek

Re: Unfinished planes

#11

Jim in Burlington Ont.

Life's backward

Jim in Burlington On

>I'm sure not the only guy that was thinking there would be more free time as we age and now find ourselves veering away from actually making furniture. My pile of lumber is big. I do like the idea of divesting aftering a mourning period of adjustment. As usual sitting in my chair after a 15 hour day wondering why I didn't stay retired. Good luck to all with their project planes.

Re: Unfinished planes

#12

Re: Unfinished planes - warning

Parisian, VL

>Glad to hear that I'm not the only one with a Paul Hamler plane that is still awaiting it's time. Damn job keeps getting in the way of life.

Victor - in Warm (yes, February 29 got the AC cranking again) and Humid Houston

Re: Unfinished planes

#13

Jack Guzman from Maine

Re: Unfinished planes

Jack Guzman from Maine

>Yea,I have unfinished plane projects.Along with a bunch of other stuff.I got close to the finish with two shepherd kits.Just need to finish opening the mouth and final smoothing of peening marks. I put them aside temporarily to do something else and I can't seem to get started again.I'm sure I will when the time is right.I keep saying that.---Jack

Re: Unfinished planes

#14

Re: Life's backward

Derek Cohen (in Perth, Australia)

>Hi Jim

I love making furniture. It is my first love and interest in woodworking. One of the issues I find myself having increasingly to deal with is that life seems to get busier each year - more a case of not having enough time to do all I want and/or not having the concentration span to spend on long projects. At the same time I am too hyperactive and single-minded to sit around just contemplating things (I get enough of that at work). Consequently, I find that building and restoring tools, or some other smaller project, starts to fit better with the time available. I think that is the attraction of such tasks for many others as well. For example, rather than get involved with a couple of large cabinets that my wife is asking for, I built 4 smaller side/sofa tables last year. Or I made a lot of smaller tools (a bunch of presentation boxes, a few planes, and a largish number of marking knives, awls, etc).



Regards from Perth

Derek

Re: Unfinished planes

#15

Tool porn !

steve mackay

>

Re: Unfinished planes

#16

all my planes have finish on them

Bill Houghton, Sebastopol, CA

>just, in some cases, it's mostly oxidation...

I've got a couple of planes that need some attention - broken horn on the tote, and so on - but mostly they're ready to use. I just don't seem to find enough time to use them.

Re: Unfinished planes

#17

Marking Knives

lignator

>Derek -

That is fantastic tool making, woodworking, and photography.

Your an artistic craftsman and a damn good writer.

It's posts like yours that make me want to throw out all my tools and use my garage to park my cars in again.

Thanks for sharing.

rick

Re: Unfinished planes

#18

Re: Marking Knives

Derek Cohen (in Perth, Australia)

>It's posts like yours that make me want to throw out all my tools and use my garage to park my cars in again.

Then I've done my job Rick ... more tools for me!!! :)

Building or restoring tools is more about persistance than skill .. MUCH more about fun and the desire to be creative than the actual need for a tool (who actually needs that many tools!). I love seeing the work of others, be it tools or furniture, or thingamabobs - there is just too little posted on the handtool forum. I wonder why? I sometimes post pictures of tools here, then regret doing so immediately after. Sort of "post-post trauma" :) No doubt some read these as gloats. They are. But they are also just meant to be fun. Things can get a little too serious here at times. There - done with my need to say this (I'll regret it after I have posted :) ).

Many thanks for the kind words. Garages are for tools. Parking? .. that's what driveways are for!

Regards from Perth

Derek