We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>I had found this hammer at a flea market last week. I didn't buy it because it was in a box full of cement working tools and the seller didn't want to bust up the set, especally. that "cement busting hammer". I knew of coarse that this wasn't a cement busting hammer. I felt it was a hammer for tensioning large circular saw blades. At any rate, I turned my buddy on to it, and he sold it on e-bay. I thought it would of done better then it did, but that's not here nor there.
It was used to hammer large sawmill circular saw blades. Sometimes they would over heat and warp. An experienced saw smith knew where and how hard to hammer the blade.
The hammer is quite large, like maybe 3 pounds or more. The handle is short and is used to gauge the angle of the strike. The end of the handle contacts the metal just before lowering the head down. This helps to control how the face of the hammer hits the metal so as to reduce denting.
>I think it was a saw "doctors" hammer too. Also Japanese blacksmiths used a very simular hammer as a general purpose hammer. I think this type is called a dog head hammer.
The few saw hammers that I have seen were octagon this example may have been home made or very modern and maybe that was why it didn't do any better, plus I guess no name on it either.
I would have cleaned it up better, wire wheel the paint off it and polish the face and that would have helped the price too. Really hurts the price when you sell somthing like this that hasn't been cleaned properly......Todd
>Likely picked up somewhere at a flea market by a laborer to be used when setting forms. Think of it as a portable anvil with a long handle for ease of moving along the inside of the form when pounding nails from the outside. I used a twelve pound monster years ago setting forms on construction site in central Michigan. Trust me, by the end of the day that handle was a great way to drag it around, 'cause I sure wasn't going to lift it very far.
Victor - running the A/C again in hot and humid Houston