Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Adjusting my expectation of perfection

Posts

Re: Adjusting my expectation of perfection

#26

Arguing by analogy

Bill Houghton, Sebastopol, CA, sunny so far!

>I used to tell new staff in the human resource office in which I worked that our goal was zero errors, because any error could harm an employee or the university or both; that we'd never reach that goal; and that we should look at every error to see what it could teach us, after we'd fixed it.

I try to see my work, wood, metal, car, etc., the same way, though, as Jerry Palmer said on Neanderthal Haven, "Someone said the real test of a craftsman is his ability to recover from his mistakes. I'm practicing real hard for that test."

Re: Adjusting my expectation of perfection

#27

Re: Romantic nonsense...

ThomD

>Stipulating that perfection is not possible, but big wacking cracks in mitre joints or tight mitre joints are... There is the romance that hand work is unique because it is flawed, and there is the romance that accuracy by hand is highly possible. Up until recently the only way to get accuracy was by hand. Machines, like photography, allow you to make multiples, but the underlying accuracy was always built by hand. There isn't a rightness or wrongness to it one way or the other. As long as it isn't an excuse:

It might make me feel better if football was played at a level I could keep up with. Nobody could rush faster than 100 yards in 20 seconds and so forth. And people like me would sit in the announcer's booth and dream up reasons why guys who could break 10 seconds weren't really playing the game. Some people may likewise be spinning their mangled projects. Saying that they are hand made, and necessarily rough, but only because they are crap. What is crap? Unintended stuff. I suppose it also would be random, incomprehensible, intentions.

As Pye described, there is workmanship of risk, and there is certainty. I think it belittles craft to suggest that workmanship of certainly, like planing a straight line with a plane should come out all squiggly. What kind of Beaver on LSD would it take to do that?

So if, as in the original example, the miters gapped, that isn't Michelangelo sculpting the David, it's normally an incompetent, careless, hack leaving a calling card.

I also think this whole contrast between machine and hand-made is somewhat artificial. A power tool can do things faster, it can jig reproducible results. But some machines, like disc grinders, are very open geometry, and have a high degree of skill in use to achieve consistent results. While other devices like hand planes have limited geometry, and can be used for highly repeatable jigged processes. Simple non-mechanical tools like chisels are highly jigged, that's why we need so many of them. The well equipped workshop is full of tools, precisely so that all the determined shapes can be linked together to create a determined whole.

Re: Adjusting my expectation of perfection

#28

Re: perfection

Moses Yoder in White Pigeon, MI

>I believe it is very easy to look at something someone else has done and tell them what is wrong with it. It is more difficult to actually build something. Each one of us makes decisions about how we spend our time each day. It is a personal decision. A lot of people may think it is a waste of time to make a dovetail fit in such a way that someone who isn't doing anything can come along and aprove of the way the joint was made. On the other hand as has been mentioned making a joint fit well is not so much a matter of the amount of time spent as it is the skill of the craftsman. Frank Klausz can make a dovetailed drawer with no gaps in it in less than 1/4 of the time my gapped drawer is made. So perhaps I should give up on it and just make the joints with a jigged machine. Nuts.

Another thought, a $3000 piece of work is not an expensive piece. When gasoline cost 10 cents per gallon a $3000 piece was expensive. Now gasoline costs $3.00 per gallon, or 30 times as much, so you would have to charge $90,000 before you would have an expensive piece. I'm with Krenov on this one; I just want to get paid the same amount as the plumber.

Re: Adjusting my expectation of perfection

#29

Re: Adjusting my expectation of perfection

Paul M.

>I have a relative that asked me to make her a piece of furniture. She likes stuff that is covered in paint and then "distressed" with sanding and beating on it with chains.

I declined. My demand for perfection is too high to go to the effort to produce something with balance and decent construction that will last for years and then beat on it.

It's not only important to produce items that meet the demands of your eye, but it's also just as important to NOT produce items that you cannot stand to meet the customer expectations.