Why I love Tasmanian Blackwood
Derek Cohen (in Perth, Australia)
>Here is a box I have just completed. It is made from a piece of Tasmanian Blackwood that was lying in the scrap box. Why the scrap box? Well, it really didn't look like there was much colour for interest. It was just a nondescript tan. It is nice wood to work, and stable (I have used it as infill in planes), and hard.
I splashed on a little Danish Oil, and suddenly the wood was transformed into the most gorgeous array of colours. These photos do not come close to doing it justice.
The purpose was to built a presentation box. Here it is... the join is so hard to see that it looks like a solid block of wood.
The present is actually a couple of chip carving knives. One is She-Oak and the other is Jarrah.
These are the first chip carvers I have made. They are for a chip carver. I hope they are OK. I have ground and honed the blades to a single bevel. They are Razor Sharp.
Regards from Perth
Derek
Re: Why I love Tasmanian Blackwood
#2What Jointline!
Jeff S.
>Very nice work, as usual, Derek. The jointline is invisible!
Jeff
Re: Why I love Tasmanian Blackwood
#3Very nice!
Scott Burr in Ben Lomond, CA
>That was a plain looking scrap wood!?! Dang, you sure brought it to life.
I like the curves of the knife holders with the squareness of the box too.
Re: Why I love Tasmanian Blackwood
#4ditto - very nice!
Mike Schwing from Maryland
>
Re: Why I love Tasmanian Blackwood
#5Super, Derek, What's the
Tom Colligan
>thickness of the stock? IMHO it appears to be a little on the thick side, but your craftsmanship overwhelms it nonetheless. Tom,
Re: Why I love Tasmanian Blackwood
#6Re: Super, Derek, What's the
Derek Cohen (in Perth, Australia)
>Thanks for the kind words Tom.
The stock is 3/8" thick. The box is 8" long (external measurement).
I have gone thinner in the past, built a few at 1/4", but find that the pins can be a little fragile in this wood. Some pieces can get brittle. So survival won over from aesthetics. :(
Regards from Perth
Derek
Re: Why I love Tasmanian Blackwood
#7Re: ditto - very nice!
Todd O. Cronkhite Maine Native, Presently Away
>Boy o Boy, somebody is gonna be ever so pleased to receive this triple gift! I don't think the sides are too thick. Mighty fine job Derek.
Can I come pick your scrap pile? ;~)
T.O.
Re: Why I love Tasmanian Blackwood
#8Tasmanian Blackwood?
Robin Corell in Atascadero Ca
>Is Tasmanian blackwood diferent from acacia melanoxlyn? for those unfamiliar with the latin it is what is commonly known as austrailian blackwood, or in California where it also grows it is known as black acacia.
Nice box & knives.
Robin
Re: Why I love Tasmanian Blackwood
#9Re: Tasmanian Blackwood?
Andrew F in Australia
>One and the same, Robin
Acacia melanoxylon
Cheers,
Andrew



