Re: how'd you like to come talk to my wife
wilbur
>First, I have to finish talking to my wife about mine. Luckily, I've already bought a scrub plane. :@)
Knowledge You Can Build On — Est. 1998
Re: how'd you like to come talk to my wife
wilbur
>First, I have to finish talking to my wife about mine. Luckily, I've already bought a scrub plane. :@)
Re: Some further thoughts.....
Stephen Kirk in Quakertown PA
>Thanks for the insight. I'm often in the same boat, only I'm happy if with a 4/4 board I can wind up with 3/4" in most cases. I don't always wind up with the absolute best boards out there and I often "find" wood that other may pass up because it is too warped or cupped. In several cases, the found wood far exceeds anything bought in it's grain and figure. It's just a matter of getting the lumber reasonably flat.
As I said below, my main reasoning for getting a scrub plane is to get boards flat enough to put into the planer. I want to do the same as you, though, which is to get one side of the board flat while removing as little wood as possible. I like to work wider and longer boards, though, so crosscutting to smaller pieces isn't always an option.
I think I'll try the scrub option, simply because I have to dig in somewhere. However, I'll keep in mind looking for another true jack or fore plane and put a cambered blade in it. Maybe I'll even make a woodie at some time just for this job. I'm all for trying lots of things.
Re: Some further thoughts.....
Wiley Horne--So. Calif.
>Stephen,
Yes, for the situation you're describing, you've made an excellent choice, and the LV scrub will give outstanding service. Good choice.
Wiley