We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>I tried making a float, again. Didn't turn out well. I haven't been all that successful implementing the various methods I have read about. Maybe grinding the sides off a rasp would work better than trying to cut a float. I don't just buy one, because sooner or later I will probably buy a mill and the rest will be easy, heck you could buy half a small mill for what a set of floats costs. I have used a metal scraper to help flatten the bed, that is easy to make, and should produce good results, though so far it seem s a little too slow.
>Wiley, would it be a chore to post a picture of the wedge-armed plow that you acquired from Clark & Williams? I'm anxious to see what their product looks like. Tia, Tom.
Here's a link to Clark & Williams' current offerings. The plough is shown on both p. 1 and p. 2. Mine is like the one shown. I was struck by how solid the plane is, and what a quick setup it is. It's like you're in business right now. I can take photos or provide more information, if you like.
>I'm at a loss for words. Your creations keep getting more complicated and better looking every time. You must be very satisfied (and proud too) with this plow. I can't wait to see it next week.
I appreciate the pics and descriptions, they answered any questions I had. Thanks for sharing (like you really had a choice, huh :o)
Raymond
who's amazed and inspired by the 'Great Zodo'. You are the man behind the curtain and thankfully you give us a peek.