Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Quality of no name mortise chisels

Posts

Re: Quality of no name mortise chisels

#26

Thanks!

Dave (Arlington, VA)

>Thanks for your reply, Derek.

I won't be flattening the back of this chisel. I feel like I've spent half of my time in my workshop flattening the backs of various flea market-bladed finds. Flattening the back of this particular chisel would require the removal of ALOT of steel...and I no longer have the patience for it. I guess I'd rather get a Ray Isles and pretty much be done with it.

Thanks for you comments, though. It helped me make a decision on this particular chisel.

Regards -

Dave

Re: Quality of no name mortise chisels

#27

Re: Necessary?

Thom D

>You are right you don't need a bolster at all, unless you want to make a bolstered chisel. If you just want a handle that never shift drill a very big hole, and fill with epoxy so the tang is awash. This can be done in various ways so it shows or doesn't. You can lift a big boat out of water with that joint.

The fun thing about blacksmithing is figuring out all the methods so that you know what is what If Anthony had come back and said they used special swages for that feature I would have had to re-assess my pathetic efforts at manually upsetting iron... :0)

Re: Quality of no name mortise chisels

#28

Here it is

Frank D. in Montreal

>I'm still talking with a bolster but no welding necessary. The bolster ain't going anywhere:


img