Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Bedrock 640 scrub plane *LINK*

Posts

Re: Bedrock 640 scrub plane *LINK*

#26

Re: Learning MIG

Clay C in Miami

>"Do yourself a favour and get one of those (good quality) auto dimming helmets...you won't regret it....Rob"

_________________________________________

Truer words wuz never spoke ...

I took an arc welding class (not MIG, and without benefit of an autodimming helmet) and it was one of the more frustrating experiences of my entire life. Like trying to play 'Operation,' but -- blindfolded.

BZZZZT! (wrench the electrode off the work)

BZZZZT! (ditto)

BZZZZT! (ditto again)

BZZZZT! (replace electrode)

BZZZZT! (wrench the electrode off the work)

BZZZZT! (ditto)

BZZZZT! (replace [now-cratered] workpiece)

BZZZZT! (wrench the electrode off the work)

BZZZZT! (Resist throwing hot metal in the crowded shop)

BZZZZT! (ad nauseam)

I got a little better after 6 weeks of sweaty frustration, but it was never fun. I now admire clean welds with a whole new appreciation. I understand MIG is easier, and an auto-dimming helmet would have made all the difference (like taking off the blindfold), but I wasn't aware such a thing existed at the time.

Clay

Re: Bedrock 640 scrub plane *LINK*

#27

Re: Yo Andy

Victor P

>Oh ya, the old Wordstar commands still work in windows...Go figure.

Victor - taking a break from wor-eeerk.

Re: Bedrock 640 scrub plane *LINK*

#28

Re: Learning MIG

Dave Thompson

>I understand MIG is easier...

I took two welding classes. We spent a majority of the time mastering stick welding with cheap generic sticks. I spent several nights learning to TIG weld alumunim and stainless steel, only to learn that this is ultimately where the skill goes, and something only for the most trained welders. MIG welding we were all masters in about 10 minutes of training.

Re: Bedrock 640 scrub plane *LINK*

#29

Very cool!

Roger Nixon

>

Re: Bedrock 640 scrub plane *LINK*

#30

Re: Learning welding

Thom D

>-MIG is like squirting ketchup, though ultimately it IS tricky because it can create welds that while they look good are really just sitting there on top of the metal. In reality, the three methods all have their pros and cons, and their difficulties.

- TIG may be the hardest to learn, but you always know where you stand with the results, and you can weld just about any metals you want like bronze, copper, stainless, with nothing more than a few strips of offcuts. Also, if you do your welding in a fire prone woodshop, this one is very controllable.

- I learned on AC stick which is tricky, but the common DC stick machines are pretty easy and weld plate fast and with ease. Cheapest to own.

I agree with the comments about autodarkening helmets. That is what I learned with. It does mean you can see the set-up. But I don't know if that helps as much as one thinks it does. I still had enough trouble, and even through an autodark helmet seeing through to the far side of the arc where the action is happening is a challenge. Also since you do get arced for some miniscule 1/25000 of a second or less, and since you are getting that for all the abortive startup flashes anyway, which as a beginner are about as far as you get, I used to get everything the way I wanted it with the helmet down, close my eyes, arc, and then open my eyes. So really what's the difference? Autodark is good, but don't let the 200-500 good helmets cost stop you form learning.

The good news is that for this kind of project, it doesn't mater since few lives will be lost if your plane sole detaches. And anyway a few good tacks along the joint would be all that were necessary to stop that happening. I'm working on tigging together bike frames, which is a little scarier as to outcome.

After I learned to strike an arc with stick, I was welding up a storm, and made all kinds of stuff. Getting aircraft quality results is a longer term goal, but making lots of gear for your wood hobby is easy.

It's great to see someone bust a move with this approach. I have mentioned several times here that it ought to be possible to go down this path. Most recently in the context of Shepherd. But I was always thinking of the infill stuff, maybe people would still resist on infills?

Re: Bedrock 640 scrub plane *LINK*

#31

Cool RB, glad to see you're still at it!

Raymond in Trenton, NJ

>