Gloat from Chicago�s Maxwell Street Market, and .. *LINK*
David
>...the ones that got away
Well, the tool pickings at Chicago's Maxwell Street Market are a sad vestige of what they were in the 1980s when one had to make a couple trips back to the car with the loot (and when the Market was actually on Maxwell Street instead of Canal Street). I actually haven�t found anything gloat-worthy in maybe a year � until an hour ago.
A guy had a very nice carpenter�s tool chest full of the usual auger bits, files, misc stuff and I started digging through it. Came away with the following for $40:
� A gunmetal fillister skate from a #42 AND a complete set of #42 cutters (the latter was something I needed)
� Two big handfuls of Stanley cutters � look to be two near-complete sets of cutters for a #45 and #55 � no boxes though.
� The front tower and some other #55 parts
� Three aluminum Stanley totes (#5-8 size)
� A Stanley #386 jointer gauge � used, but very good shape
� A Stearns jointer gauge
� A couple Stanley Everlast chisels � the long ones
� A matched set of 4 different size screwdriver bits for a brace. These are very nice, marked Vaughn & Bushnell and have the full taper down to a very fine tip for furniture screws
The bad news is that I described the #42 to the guy and asked him if he had it. Said he sold three planes like that (I�m assuming the #42, #45 and #55) and "some other big planes" to someone last Sunday for $100.
I was out of town last Sunday. Oh well, I�m happy for what I did find, though.
Also, from different vendors, I picked up a several turn of the century Disston handsaws for $3 each. Nothing really special except a #12 with a patina too deep to see the etch. And a Stanley-made 9 � block plane marked Craftsman (I knew they made Craftsman planes for a while and have a Stanley #45 marked Craftsman, but I didn�t have this one).
Regards, David
Description of Mawell Street market



