Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

New Toy...uh, I mean...Tool (Essential)

Posts

Re: New Toy...uh, I mean...Tool (Essential)

#26

Confirmed bottom feeder

Bill Houghton, Sebastopol, CA

>If I suddenly had money, I'd probably buy an LN block plane and 4-1/2 with the high angle frog, but I've made it so far with $1-10 planes for the most part (No. 8 cost me $55, but worth every penny).

Re: New Toy...uh, I mean...Tool (Essential)

#27

Re: $65? The LN site says $85 for the 100-1/2.

William Duffield, on the Cohansey

>Oops, Sorry! That's what my invoice says, too, plus $6 shipping. I don't know how I make mistakes like this, especially since I know I have done so in the past, and try to double check. Maybe too much sawdust on my glasses?

Re: New Toy...uh, I mean...Tool (Essential)

#28

Re: Hey John.... *LINK*

John Aniano, lurking somewhere in NJ...

>Hello Todd,

Yes, I lurk here quite often but generally keep to myself. I'm working on several cello bows for a big exhibition/sale in the UK and early next year in the USA. See the link below for the Los Angeles event.

As for Raymond "Yeti" Wendrzycki, as far as I know, he's been busy with work. Also, he's been working on his extensive bathroom restoration project. As all you out there who have done this sort of job single-handedly, you know how much time and effort home projects can take, especially when you want it to be just right.

Over and out,

John


Take a Bow 2006

Re: New Toy...uh, I mean...Tool (Essential)

#29

Re: Raymond

Dave Anderson Chester, NH

>I had the god fortune to have dinner with Raymond about 3 weekends ago at our favorite fish place in Dover NH as he was driving up for a weeks field work at the Brunswick ME Naval air Station. He's been quite busy recently with home and yard type stuff and with work.

Re: New Toy...uh, I mean...Tool (Essential)

#30

Re: Todd vs. Todd

Rich Stevens

>Hey, Tod O'C,

I too started down the slippery slope buying old US iron from the turn of the century - the three patent date types. I wnet regular Baileys and not the Bedrocks (too much moola for me at the time seeing I was a newbie). Got myself quite a few either thru eBay or locally at flea markets and historic tool get togethers.

It was an expensive way to learn about old planes - especially since I live in Melbourne, Australia and shipping iron from the US isn't what I'd call cheap.

So what were my impressions of old planes - firstly, they are miles better cast and machined than the modern day stuff. Where I got really hurt financially was the condition some of these planes were in - on a couple of planes I bought both had been aggressively sand blasted rendering them worthless. A beautiful corrugated base 07 I got had a hole drilled into the sole for hanging - my fault coz I didn't ask the right questions. Also, it is sometime so difficult get an up-close look at some planes on eBay - let the buyer beware etc etc - I got burned eh?

In addition, as part of the tune-up process, spent time and money fixing them up - flatenning, new blades, repolished handles and totes etc etc

In the end it got all too hard, too expensive and too dissappointing and except for a a Bailey 06 and 07, all the others have been relegated to the back of my tool cupboard where they're likely to spend many years in blissful retirement.

I did the 'math' and came to the conclusion 1)I wanted good quality tools, 2) I wasn't a collector of old tools and 3)I wanted to use them. The conclusion I came to was to buy Lie-Nielsens and I haven't looked back. Last weekend I got my birthday and X'mas present early - an LN 7 1/2 LA Jointer Plane. Now we're talking...

My five cents from downunder

Rich

Re: New Toy...uh, I mean...Tool (Essential)

#31

Re: Hey John....

William Duffield, on the Cohansey

>Ray is alive and kicking, or in his words, after I mentioned your query to him, "Alive and Kicking Like Hell!" He stessed that I should be sure to deliver this message to you in a timely manner, without pulling any editorial punches.

I had dinner with him this evening, where he demonstrated new handmade wooden chopsticks, and after which we attended a CJWA meeting. He is still working wood. Home projects have expanded beyond the interminable bathroom remodel project. He is building frames for stained glass windows for the dining room. Just last month, he gave a very interesting presentation on timber framing at Walnford Mill, and even brought Sue with him. I haven't seen her stainded glasswork, yet.

Now, John Aniano is a Horse of a Different Feather. Rumors of his continued existence surface from time to time (kind of like some other musical icon), but I haven't seen him in a coon's age.