WoodCentral Forums

Est. 1998 — 27 years of woodworking knowledge

Flea markets *LINK*

Posts

Flea markets *LINK*

#1

Flea markets *LINK*

Ernie Miller Topeka

>Here is a web page that list some of the flea markets by state it is far from complete but it is a start for thoes of you that don't know how to get started.

here is another one it might be better if you area is not in the first one.

http://collectors.org/FM/


Flea's

Re: Flea markets *LINK*

#3

Re: Flea markets

walt quadrato

>Hey Ernie...don't give away all our secrets!! :-)

walt q

actually, it's not all that complete..there are lots more that never make the list..my recommendation..pick up an antique guide/magazine for your area and check out the ads...you'll also find a lot of antik mauls too...I'll be at Stormville NY this weekend...buying and this time selling too...hope to see some area galoots there...

Re: Flea markets *LINK*

#4

Re: Flea markets

Ernie Miller Topeka

>I know there is only about 20% of the local ones I know of but for them who need a little help this will get them started. then if they talk to people there they will find more in there area.

Re: Flea markets *LINK*

#5

Stormville, NY

Sandor in Boyds, MD

>I just had to respond here. So many fond memories of that airport....

My friends and I used to hang out at the airport and skateboard to punk rock music on a halfpipe ramp that we built there during high school in the late 80's. I remember listening to the same worn out cassettes over and over from the $5 tape player in my $200 Caprice Classic.

For anyone who doesn't know, the Stormville flea market is well worth the trip even if you have to drive a couple of hours to get there.

Sandor(formerly of Kent(Carmel), NY 15 mins from Stormville)

Re: Flea markets *LINK*

#6

Re: Flea markets

Victor Parisian - Houston

>Houston has several flea markets!! Well kinda sorta. Gotta talk my lovely bride in leaving town for the week end..:)

Re: Flea markets *LINK*

#7

Hey Sandor

Todd O. Cronkhite Native of Maine

>High School---Late 80's?

$200 Caprice Classic? In my day I'd had bought 4 cars for that!

Best car I had evr bought. dollor for dollar was in 1980 I paid $100 for a solid'65 Ford Falcon station wagon. Loved that car. White with a red interior. Would still have it except for one Spring day when I was full of vim and viganer I tried to pass my buddy on the right hand side of the road and sideswiped a telephone pole. Blew out the windshield, and ALL the glass on the right side. Other than a broken heart I didn't get a scratch. Drove it to the junkyard as a matter of fact.

I'm a Chevy man at heart, but have a soft spot for Falcons, especially the '68 Sports Coupe Futura. Someday I hope to have another one of those.

Todd O.

Re: Flea markets *LINK*

#8

Re: Stormville, NY *LINK*

walt quadrato

>Sandor,

If you were doing that in the late 80's..did you ever go to the flea market then? I would have been one of the guys selling punk rock/classic rock and everything else lps/cassettes..usually in the center of the left field..just down from the antiques area. We uaually came in a group of 4 dealers..all set up next to each other and taking 3 spaces....a grubby lot to be sure. There weren't too many record dealers then...but ,man, were there tools..especially ilked the local auction house that dumped the contents of 2 high cube trucks on the ground..box lots that were cheaper than the dirt they sat on..ah, the good old daze.....

I'll be bringing the Rodier and the Woonsocket Bailey on Sunday..not to sell..but you can play with them if you'd like.

walt q


BCR

Re: Flea markets *LINK*

#9

Re: Hey Sandor

Ernie Miller Topeka

>I used to by pickups back then for $100 or so use and abuse them then sell them for more than I paid. Wish I still had that 1/4 ton 36 binder I bought back then. it didn't deserv me back then but it would now.

Re: Flea markets *LINK*

#10

Re: Hey Sandor

Sandor in Boyds, MD

>So I might be a little younger than most here, but I bet I have more grey hair!

My sister and I bought that car in '87 when I turned 16. Sharing a car with your older sister is not something I'd recommend, but then she went off to college and I got full use for a few months until she came home and blew the engine by driving it well after the radiator failed and dumped all the coolant.

This was the first in a whole line of $100ish cars that came and went...

Sandor (with Emma, and that's a stealth gloat!)


img

Re: Flea markets *LINK*

#11

Not very stealthy

Bill Houghton, Sebastopol, CA

>but VERY gloatworthy!! What a cutie! Are you watching for small tools, so you can be ready when she's old enough?

Re: Flea markets *LINK*

#12

Look at the Bright Side Sandor

Todd O. Cronkhite Native of Maine

>you've got LOTS more hair than I do!

Ernie, don't tell me you destroyed a '36 'Binder pickup. Damn man, that's gotta be painful to look back onto now. Ohhhhhhhhh the Paaaaaaaaaaaain, the agaony, the misery :~(

Enjoy Emma while you can Sandor, thaey turn into teenagers REAL FAST!

Todd O.

Re: Flea markets *LINK*

#13

Just Googled 'binder pick up' - translate please

Victor Parisian - Houston

>Intenational = combine = binder?

There is a real nice blue International 1/2 ton here in town a believe its a 65 maybe as late as 67. Very clean with zero rust.

Re: Flea markets *LINK*

#14

Re: Just Googled 'binder pick up' - translate plea

Todd O. Cronkhite Native of Maine

>Victor,

Sounds like you've got it. 'Binder is slang for Cornbinder, which is slang for International Harvester machinery, to include their pick-up trucks.

Whilest Ford's are probably the mosr popu;at tricks of the 30's, followed up by Chevy and Dodge I 'Binders in my opinion are way, way, way, overlooked.

Todd O.

Re: Flea markets *LINK*

#15

Jack Guzman from Maine

Re: Just Googled 'binder pick up' - translate plea

Jack Guzman from Maine

>I still have my 68 one ton parked in the weeds.It stopped running 16 years ago but I loved that truck.392 4 barrel ---Jack

Re: Flea markets *LINK*

#16

Warning

Bill Houghton, Sebastopol, CA

>Our son owned a mid-60s Travelall for a while. Back then, International sold their pickups the same way they sold their Class I (big) rigs: you could order a beam front axle, or you could order independent suspension, or you could order... So, they bought a lot of different components from a lot of different makers, and finding, say, a power steering part for a particular year of a particular front suspension (just as an example that our son remembers vividly; he tried welding said unobtainable part about five times before giving up) may now approach the impossible.

It also weighed several tons and got the gas mileage of the Queen Mary with her anchors dragging.

👍 This page answered my questions

Your vote helps other woodworkers quickly find the answers and techniques that actually work in the shop.