Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Slow -speed Grinders

Posts

Re: Slow -speed Grinders

#26

David Barnett

Re: Oneway wheel balancing system? *LINK*

David Barnett

>Yeah. I would never have sprung for this if I'd just seen it in a catalog, but after using balanced wheels at a couple of shops where I studied woodworking several years ago, I immediately bought a set. Now that I have a small metalworking lathe, it's easy to make my own.

This won't necessarily cure a badly manufactured grinder, of course, but on a good grinder like my Baldor, some older Deltas, Milwaukees, and so on, what you're doing is correcting for the wheels themselves, which is really the idea. Better for your grinder, better for your wheels, and better for your tools.

The one I have (and prefer), may still be available: http://www.nicks.ca/sharp.html#ballancer

The newer one is fine, though.


Oneway "Wolvering" balancing system

Re: Slow -speed Grinders

#27

Re: Slow -speed Grinders

Steve Knight

>I should have one somewhere. http://www.knight-toolworks.com/web_temp_pics/grinding8.JPG


img

Re: Slow -speed Grinders

#28

Grinding on Lathe

Adam Cherubini, NJ

>I grind on my JET wood lathe. 8" 60 grit white wheel turns at approx 500 rpm. At this speed, I still overheat tools. A light touch helps, but that can be used on high speed grinders as well.

More and more I try to avoid grinders. Been trying a stationary belt sander for turning tools.

I resharpening my chisels and planes free hand using sand paper (though I use 80 grit Norzon for restorations).

Speaking of restorations, that might be the best use for a grinder.

Not sure I've helped here, sorry.

Adam

Re: Slow -speed Grinders

#29

Re: Veritas honing jig

Adam Cherubini, NJ

>Lyn,

What about a veritas honing jig? I know its not what Greg was asking, but doesn't that meet most or all of your criteria?

Adam