WoodCentral Forums

Est. 1998 — 27 years of woodworking knowledge

Fasteners

Posts

Fasteners

#1

Fasteners

Doug Ridley

What do you call the little cleats we used to use on the underneath side of a split to hold it together? They were about an inch long with sharp points on each end.

Re: Fasteners

#2

Butterflys

Mark Mandell - Gone Round in New Jersey

Forgot the other name.


But I cut mine in the top as part of the design. They're inlayed have the thickness of the board.


Re: Fasteners

#3

Re: Butterflys

Doug Ridley

Mark, I'm talking about the little metal cleats that were hammered down on the back side to keep a split from going any further. I remember them but can't remember the name.

Re: Fasteners

#4

Oh

Mark Mandell - Gone Round in New Jersey

"never mind"

:D

Re: Fasteners

#6

Re: Butterflys

Bill Tindall, E.Tn.

I know what you mean but never have seen the name. "Squiggly Thingies"?

Re: Fasteners

#7

Re: Butterflys

Doug Ridley

Found the thingies at Lowes. It is just a cheap table of my daughter's but it is pretty. I have it glued back together but wanted a little insurance. Thanks for your suggestions. All done.

Re: Fasteners

#8

Re: Fasteners

Wiley Horne

Maybe one of these:

https://www.lowes.com/pd/Hillman-8-Count-1-in-Zinc-Plated-Wood-Joiner-Nails/3036054?cm_mmc=shp-_-c-_-prd-_-hdw-_-ggl-_-LIA_HDW_126_Fastening-_-3036054-_-0-_-0-_-0&ds_rl=1286981&gclid=CjwKCAjwqeWKBhBFEiwABo_XBmwy6lr1YyXfRHzLl90vcVmFWvhHwiONGLwsCwObuL4WOy3ncHgRPBoC7gIQAvD_BwE&gclsrc=aw.ds

https://www.lowes.com/pd/Hillman-30-Count-5-Gauge-5-in-Zinc-Plated-Joint-Fastener-Nails/3036056?cm_mmc=shp-_-c-_-prd-_-hdw-_-ggl-_-LIA_HDW_126_Fastening-_-3036056-_-0-_-0-_-0&ds_rl=1286981&gclid=CjwKCAjwqeWKBhBFEiwABo_XBm-kXVeElsIiKjchLTPcYBlUBvKow_qpiCZgFS4cI4pjxIIX9ihlRRoCvHYQAvD_BwE&gclsrc=aw.ds

Wiley

Re: Fasteners

#9

You got it


Re: Fasteners

#10

Ellis Walentine

Re: Fasteners

Ellis Walentine

I seem to recall having a few boxes of these about 50 years ago the probably belonged to my grandfather. Their primary use was to join picture frame moldings. And I'm pretty sure the packaging referred to them as scotch fasteners, although it seems that term is now used to describe an extreme type of Velcro.

I guess you can't go wrong with the descriptive term, corrugated fasteners.

Ellis

Re: Fasteners

#11

Re: Butterflys

Yonak

Mark, are they also referred to as Dutchmen, or is that something different ?

👍 This page answered my questions

Your vote helps other woodworkers quickly find the answers and techniques that actually work in the shop.