Re: "pure" alcohol
Mark Mandell - Gone Round in New Jersey
Happened to come across an article for removing the last bit of water from ethanol. Stated this was done in "industrial" quantities, but I tried it on what I had in the shop, that being DNA at 7% methanol +. I was having an issue with my shellac actually puckering and raising the grain on raw wood. The problem was the water content in the alk. So how did he remove the water from the azeotrope to get pure alk?
Dry Tapioca! When added to the alcohol, it soaks up the water but not the ethanol. The grain is then strained out of the liquid and laid out in the sun to dry (or put through an industrial drier) and reused.
I was a bit skeptical. Went to the food store, got a pack of tapioca, and proceeded to try it. I took an amount of the dry grain and weighed it on my gram scale to 1.000 oz.; then dumped it in a pint of DNA with a tight cap, shook it occasionally, and let it sit over night.
Next morning I poured it all through a fine sieve to recover the tapioca, and weighed the grain in the same cup. Didn't write down the weight but it was clearly more than the original oz. I then spread it on a clean baking pan put it out to dry in the hot sun. When the stuff was very dry (subjective, I know) I put it back in the same measuring cup and weighed it. Came up to exactly 1 oz.
Lastly, I used the pint of alcohol to mix a 2lb cut of shellac and applied it to some raw red oak that I sanded to 320 and vac'd well. Hey hey hey! No raised or puckered grain; just a nice even gloss on the surface.
I also prefer my martinis extra dry 