Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Board and Batten siding questions....

Posts

Board and Batten siding questions....

#1

Board and Batten siding questions....

Barry Irby

Does anyone really know how to install B&B siding?

Watched a guy building a pole barn on YouTube...He was nailing the boards in the center and right at the edges so the batten would cover the edge nails. The boards were freshly sawn.

I thought you were supposed to install the boards with one nail in the center or maybe two close together like snake eyes and then nail the batten over the gap with a nail into the gap to allow the boards to contract and "float" a bit.

Tried searching online for correct details but all I got was people faking it by nailing battens onto plywood.

What is the best practice for real B & B siding?

Re: Board and Batten siding questions....

#3

Re: Board and Batten siding questions....

Don Orr

We have Cedar Board & Batten siding on our house for nearly 50 years. The wide boards are nailed on the edges and the narrow battens are also nailed on the edges. No problems ever. I understand the expansion/contraction issue but it has not seemed to be an issue. We had an addition done about 15 years ago and they did the nailing the same way. We made sure they used stainless steel nails which they did until they ran out and had to get another box which was NOT stainless and now we have ugly black streaks on the front entrance to the addition where everyone sees them. The back of the addition is of course streak free. :\

Re: Board and Batten siding questions....

#4

Re: Board and Batten siding questions....

Mark Salomon

Each board is nailed along the side, say, the left side. The right side of that board is held down only by the batten, which is nailed into the adjoining board to the right. This allows the board to expand and contract with the change of seasons. If you nail both edges your board(s) may eventually split in the middle.