Herringbone pattern on cabinet doors
Lee
Anybody ever make a Herringbone pattern for cabinet doors, NOT full size doors? Would love to see pics and hear about your experience, what you learned, what you may do differently if you did it again.
These doors are for a credenza I will build and they will be sprayed white allowing for the pattern to still be visible.
My concerns are wood movement as I always shoot for nice clean and minimal reveals between doors/drawers.
My thoughts are 1/8” thick strips glued to a ply substrate. This should stop wood movement, but I am concerned that the tension on the one side will cause the door to bow.
Any thoughts??
