Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Adding text to your work

Posts

Adding text to your work

#1

Adding text to your work

Bill Tindall, E.Tn.

The topic of signing work came up recently. If any text goes on a piece of "heirloom" furniture it should include information important to someone dealing with potential repair and refinishing- a description of the finish and glue at a minimum. This information can be obscurely located to an owner but readily revealed to someone that is working on the piece to refinish or repair.

For a family piece I include finish schedule, glue used, where the lumber came from and who was involved in making it. Of the latter two items it is common in my case to have had someone in the family involved in construction besides myself. In some cases logs/lumber came from someone the family knew.

The finish schedule has added value. I can't remember what I used to finish something several years earlier. Some of these finishes have aged better than others. It is nice to be able to go back as see that some stain didn't fade or that some top coat disintegrated in a sunny room, for example.

I use a fine Sharpy and overcoat with shellac.

Re: Adding text to your work

#2

Time capsule

Dick Coers

I built a new altar for the church where I grew up. I wanted to donate it in my Dad's name, they didn't want that. So I built in a time capsule that only I know about. Maybe in a 100 years someone will have to take that base off leg for a repair or refinish and will be surprised at what they find. White oak, cnc carving. Same carving is used on all furniture and walls in the front of the church.


Re: Adding text to your work

#3

Re: Adding text to your work

John in NM

I made some labels back when I was trying to sell furniture. Laser printed on nice thick paper then glued on with hide glue. Basically the same info you list, but without the wood source (since it was the local lumber yard). Lost my extras and never did get around to formatting for new ones - word processors went and got hard to predict again by then (for a brief period in the 1990's MS started making a big deal out of "What You See is What You Get" - the only thing I ever liked that they came up with. Naturally they quit worrying about that shortly thereafter, probably because the trend was to encourage paperless so it didn't matter how it printed so long as it looked good on the screen.)

Re: Adding text to your work

#4

Re: Time capsule

roger lance

Impressive piece.

Re: Adding text to your work

#5

Jack Guzman from Maine

Re: Time capsule

Jack Guzman from Maine

Nice Altar. I also built an altar for my local church. I included a little something into one of the massive skirt to leg tenons.

Re: Adding text to your work

#6

Re: Adding text to your work

Barry Irby

I keep seeing an ad for some little laser gadget that you can set up in front of you work and engrave/burn information into wood or leather or whatever.

I was wondering how long it would be before I engraved myself or cut off a finger.

I have signed and dated everything that left my shop. I would like to include more information.

Re: Adding text to your work

#7

Clint Searl

Re: Adding text to your work

Clint Searl

I usually printed a label for each project with date, signature, and my chop. The rest was left for the future to discern.


Re: Adding text to your work

#8

Re: Time capsule

AZ in Colorado Springs

This year I've made three tables for the altar of my church. I wrote messages on the insides before I secured the tops.

Re: Adding text to your work

#9

Re: Adding text to your work

Pete in Holland MI

Our church adopted 2 churches in Biloxi, MS after hurricane Katrina tore things up around there. I ended up building all new altar furniture for both churches. Per Catholic doctrine, for a piece of furniture to become an altar, "holy relics" (often bone fragments of recent saints) need to be encased in the altar. With wood furniture, the relics are often sealed in a square marble stone about 12" square x 1" deep, then inset into the altar top. During the renovation of our church 20 years ago, I was requested to cut down the original altar for use in the new chapel. I saved the cut-offs. The new Biloxi altars have a piece of our altar cut-offs supporting their stones, and a laminated sign below the stone describing the this piece of wood, and the story of the furniture enseble and how it came to be in their churches. Key people know about the notes, but it's there for the historians to discover in the future.