Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E Peacock

17 July 2017

Good Morning / Evening Everyone,

It's been a really hard week at the day job and it seems that I can't hold out cutting firewood in the 90+ temps with high humidity any more either. I didn't last 2 hours cutting firewood and loading the trailer with the newly cut green wood. It was heavy enough that each piece took 2 of us to roll them up and onto the bed of the trailer. I must remind myself that I'm not 18 years old any more.! ;)

This weekend was a celebration of my 1st granddaughter's birthday....she turned 1 year old. It was nice to watch her grow and open gifts with such surprise. I think I'll spoil her some more at another time. Been having to work on things around the house and the LOML and I did a fast re-upholstery job on Monday night and Tuesday night. We redid the arms of a leather couch with new upholstery. It was easy enough to do that we had all the work and upholstery done by Wednesday morning. Now it's back to working on the old antique chair that we've been working on off and on for the past 7 months. It looks like we just may have it ready to go back to the owner by the end of the week....but here's to hoping all goes well for the final upholstery work on this chair. I'm way past ready for this one to be done.

That's it for me, so what did YOU do this past weekend?

Best of weeks to you all!

Dennis Peacock

Re: WC Weekend Accomplishments....

#2

Kneale Brownson

Re: WC Weekend Accomplishments....

Kneale Brownson


Got the DJ-20 out of the barn it's been in for more than 40 years as I continue to move stuff to storage as we prepare to sell the property. The Mercedes awaits pickup by the company that bought it.

Re: WC Weekend Accomplishments....

#3

Finished a project

Denny

I finished a very small cabinet (just 9 3/4" high.) I'm not sure why I even started this, but it was challenging. Sliding doors cover drawers, walnut/bubinga/copper.



Opened...


It's too hot to do much in the shop, when it cools down I might try a matching stained glass lantern.

Denny

Re: WC Weekend Accomplishments....

#4

Nicely done!

Henry (Raleigh NC)

Denny: I love the design, and the execution. Nicely done.

The region behind the Cu would be a great spot for a 'secret' non-obvious compartment.

Is the right side also a bank of drawers?

Henry

Re: WC Weekend Accomplishments....

#5

Re: Nicely done!

Denny

Thanks Henry. I thought about a hidden compartment behind the copper, but there wasn't much room, the copper is covering an inverted triangle that supports the drawer guides. The right side is another set of drawers.

Re: WC Weekend Accomplishments....

#6

Re: Finished a project

Johanna Johanson

What a great cabinet! How is the copper area done? It looks hammered - is that what was done?

I really like the rails and stiles, too.

Re: WC Weekend Accomplishments....

#7

It looks chalenging

Bill Tindall, E.Tn.

How did you make the "pulls" for the drawers. I like "home made" pulls but usually I don't know how to make something attractive so I buy metal..

Re: WC Weekend Accomplishments....

#8

Re: Finished a project

Denny

Thanks Johanna. The copper is a heavy foil that I hammered with a mini embossing hammer.

Re: WC Weekend Accomplishments....

#9

Re: It looks chalenging

Denny

Bill, the drawer pulls were a challenge. I wanted them recessed to be able to bring the drawers as close as possible to the doors.

I started by drilling a shallow circle with a forstner bit, and followed that with a round nose router bit that I chucked in the drill press and spun by hand to rout out the concave depression behind the ring pulls (I wasn't willing to risk ruining the drawer fronts with a router, and running the bit in the drill press was too rough, so I ended up just using the bit as a hand tool.) The ring pulls are just cheap Lee Valley iron pulls.

Re: WC Weekend Accomplishments....

#10

Re: Finished a project

roger lance

Denny.....really like the design.....the Oriental influences come off great.

Re: WC Weekend Accomplishments....

#11

Thanks, Roger!


Re: WC Weekend Accomplishments....

#12

Re: Finished a project

jesse cloud

Awesome! Great design, very clean, with a little mystery, too. Colors go together very well.

The geometry would have driven me nuts.

Re: WC Weekend Accomplishments....

#13

Re: Finished a project

Denny

Thanks Jesse. The geometry drove me a little nuts, I had to work from full scale drawings and a few new jigs to keep it together.

Re: WC Weekend Accomplishments....

#15

Thanks, Derek!


Re: WC Weekend Accomplishments....

#16

Re: Finished a project

H.C. Sakman (Chico)

I like it. It has an interesting design flair. Nice work. Is that copper in the middle?

Chico

Re: WC Weekend Accomplishments....

#17

Re: Finished a project

Denny

Thanks, Chico. It's hammered copper foil. As you can see, I have a lot to learn about working with metal...

Denny