Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Festool Domino Bit question

Posts

Re: Festool Domino Bit question

#26

Re: Thanks William and Dick....

Walt

William Duffield 6/3/2017, 4:49 pm

"Festool concept of work

It's European, not American. When you take over an apartment or a house in Western Europe, the kitchen is bare to the walls--no cabinets, no appliances, no lighting, no kitchen sink--the previous tenant or owner took it all with them."

------------------------------------------------------------------------------------------------------------------

I'm curious about this. Are all kitchens the same size and design, or is this where the 32 mm systems comes in? I doubt taking cabinets from one American kitchen and installing them in another dissimilar house would work without major cutting and fitting.

Re: Festool Domino Bit question

#27

Re: "he'd better not make any dust . ."

William Duffield

What are you doing wrong? (Rhetorical question :D ) I have no dust collection problems with my DF700XL.

N.B., I have heard of issues with incomplete clearing of the mortise, due to improper operation of the machine (plunging and retracting too quickly), but that sort of macho behavior results in several other problems that you would want to avoid.

Re: Festool Domino Bit question

#28

To Be Fair

Mark Mandell - Gone Round In New Jersey

I was plunging into an uneven surface where the face of the machine did not make full contact with the wood, but I still had a lot of dust on the floor. Of course, I was using a $90 Rigid sucker rather than a $600+ Festool Extractor ;) but still.

Re: Festool Domino Bit question

#29

Re: To Be Fair

William Duffield

I can understand how and why that would happen, and I don't think hooking up an extractor would have helped much, if at all. At least, you didn't need to get out the brush and dust pan to clean up. It's not just the CTs that are expensive, the bags are too, so I reserve the CT for the Domino and sanders, and also keep a Ridgid shop vac around for cleaning up general chips, shavings, etc. off the floor. And, I don't mind kicking it around when it pisses me off, but I wouldn't ever kick the Festool.

Re: Festool Domino Bit question

#30

Re: Thanks William and Dick....

Dick Coers

I haven't studied a lot of European interior design, but I have the feeling they have a very open floor plan. So maybe not too many wall to wall installations. The whole 32mm system was based on certain constants. Cabinet mounting is one of them. All wall cabinets hang from a J strip fastened to the wall. The cabinets have a micro adjustment hanging device on them that also snugs the cabinet to the wall. The bases have the adjustable legs with a snap on toe kicks. So when time to install or move, you loosen the uppers and lift them off the track. The track stays for the next person. The overall box dimensions are very standard in height and depth. They also have a full row of holes to either mount hinges or drawer slides. So even in a different kitchen, you could pull out all the drawers and add doors. I embraced the designs in the 80s, and even used it for furniture. A wonderful system!

Re: Festool Domino Bit question

#31

Re: Clean-up

Mark Mandell - Gone Round In New Jersey

I use the DC with a long hose and tools for cleaning (not much escapes, no pan/broom needed). I actually use the Rigid for sanders, router, biscuit, and now the Domino. Just have to remember to try to flush the nose of the machine to the work-face.

Re: Festool Domino Bit question

#32

Rigid Vs Festool Extractor???? New Question

Barry Irby

I have been using my rigid shop vac with my Festool sander and track saw and plan on using it with my Domino when my son delivers it this week. I have several smaller hoses left over from various vacs that died along the way. Turns out it was EASY to adapt the smaller hose to the sander and it is light and flexible enough not to interfere much.

The Idea of buying a $600 or $700 Festool Vac was more than I could stand. And then I learned the HOSE is about $200. And they have three sizes. You want the smaller one for hand held tools but need the largest one for the Kapex Miter saw. Yikes

My Cheap vac is working fine Especially since I added the dust bag filter into the drum. I thought $8 was a lot. NOT They seem to be working well. Significantly reduced the packing of the filter.

THEN I read that the Festool vac and hoses have special anti-static features. I thought at first this was to keep it from zapping ME, Nope, its to protect the electronics in the tools. And you can void the warranty if you don't use one. So, Is this a real concern?

Re: Festool Domino Bit question

#33

Re: Rigid Vs Festool Extractor???? New Question

William Duffield

Another rhetorical question: Then why does Festool sell hoses without the anti-static protection built in? BTW, they are cheaper than the regular hoses. If you send your extractor in for repair, how could they know which hose you had connected to it when it failed the smoke test? OK, that's two rhetorical questions.

Re: Festool Domino Bit question

#34

Re: Nobillia

William Duffield

That is amazing! It's been 25 years since I've been in Europe. Evidently a lot of improvements have been made in the meantime.

Re: Festool Domino Bit question

#35

DUH . .

Mark Mandell - Gone Round In New Jersey

Dat was a "trick" question, right?

Will there be extra points for the essay question?

Do I need to bring my own blue books?

Re: Festool Domino Bit question

#36

Re: Rigid Vs Festool Extractor???? New Question

jesse cloud

like a lot of things, the real answer probably lies between yes and no.

Like William, I think the idea that non-static is to protect the tool is probably bs, but I really hate it when my shop vac zaps me.

The price is absurd - no ifs or buts.

There are some good things about the extractors though:

HEPA filter. Don't know if your Ridgid has one, but my shop vac blows a lot of the fines out through its vent. I already have some breathing issues, so for me this is a big deal.

Auto off/on. The extractor comes on automatically when you start the tool and stays on for a while after you stop to clear up stray dust. Its not just about being lazy. If I have to walk over some where to turn on the vac before I use my tool, I often just skip it. See above about breathing.

Suction control. You can vary the amount of suction from gentle to hard. This does make a difference when you are sanding thin pieces - the thin ones want to

cling to the pad if suction is high, resulting in swirl marks, etc. Varying the suction can also make the difference between a smooth as butter flow and a rough ride, especially on the more aggressive rotex sanders.

Disposable bags. Yeah, its an expense, but they last a very long time for a hobbyist like me. Bottom line is if you are trying to keep from breathing this crap, then why empty a bag or bang a filter against the trash can and breathe that?

A few other loose points - you don't need all three hose sizes. I have one, it works fine on sander, domi, routers, ts, and kapex. The hose comes with the vac, you don't have to buy another.

I have two extractors, one for general use, another always connected to the kapex.

I didn't pay retail for either one. Watch craigslist or other used tool venues. They come up fairly often.

Re: Festool Domino Bit question

#37

Re: Rigid Vs Festool Extractor???? New Question

Derek Cohen (in Perth, Australia)

Hi Barry

If the price of the Festool antistatic hoses put you off buying larger sizes (they come standard with the smaller 26mm hose), as they did me, then search out the Bosch antistatic hoses. They were half the price when I purchased a 37mm hose.

I am not sure about the validity of the antistatic thing with Festool vac. From my reading, it seems that Festool earth their newer machines differently, hence the antistatic hoses. Older machines can use non-antistatic hoses. Is this true or even valid? I do not know. I was told that Festool will not recognise a warranty on a fried machine if the correct hose was not used. I purchased a CT26 after a Fein fried. Was it static? I do not know. There certainly is a lot of postings about this topic on the Internet forums, especially the FOG.

Regards from Perth

Derek

Re: Festool Domino Bit question

#38

Re: Rigid Vs Festool Extractor???? New Question

Barry Irby

I am using my first dust bag inside my Rigid now. I made one Boo Boo. The picture showed it fluffed up, instead of flat. I tried to fluff it. Boy are those things tender. I tore two holes in it. Won't do that again. Taped them up, packrat gene made me do it. I'm Cheap.

Your statement of having breathing issues reminds me of finding mold on one of my Home Inspections. I can't tell what YOUR issues are with mold and how You will react. Do what you need to do. (Maybe you could be the Canary in the coal mine for the rest of us.)

The hose size thing came up for someone who bought a Kapex and had to have a larger hose to get the suction he needed for it. Sticker shock.

I have an adapter I can use to hook my tiny hose to my DC and the DC is in a outdoor closet. I will not be breathing that dust, it gone with the wind. I started using the Rigid because sometimes it a PITA to use the DC and turn it on and off.

I bought a gadget that you plug in and them plug the tool and shop vac into and it turn the vac on and then leaves it running for about ten seconds after the tool is off. I had a little sticker shock at almost $50 but it has been a joy. Glad I spent the money. I highly recommend it.

The suction has not been an issue. Other than it dwindling away, which I think the dust bag has fixed or at least reduced. If I need gentler suction I can use the DC.